List of papers by topics

Plenary session

Chairmen:
Prof. Ing. Jiri KLIBER, CSc.
Prof. Ing. Miroslav KURSA, CSc.

PS1
TERRYN Herman
Vrije Universiteit Brussel, Brussels, Belgium, EU
Using Green Surface Treatments for Nano Coatings on Metals in 21st Century - INVITED LECTURE
PS2
KVAČKAJ Tibor
Technical University of Kosice, Kosice, Slovakia, EU
Structures and Properties Formation by Plastic Deformations - INVITED LECTURE

Commercial presentation

Chairmen:
Prof. Ing. Jiri KLIBER, CSc.

KP1
JIN Shan
Thermo-Calc Software AB, Stockholm, Sweden, EU
Thermodynamic and Kinetic Modeling Tools and Their Application to the Lifecycle of Steels - COMMERCIAL PRESENTATION
Co-authors: BRATBERG Johan, ENGSTROM Anders, CHEN Qing
KP2
NOVÝ Zbyšek
COMTES FHT a.s., Dobřany, Czech Republic, EU
Relevance of Prototype Production at Research and Development of New Structural Materials and Processes - COMMERCIAL PRESENTATION

Session A - Advanced Iron, Cast Iron and Steelmaking

Chairmen:
Ing. Jaroslav BREZINA
Assoc. Prof. Ing. Libor CAMEK, Ph.D.
Prof. Ing. Karel MICHALEK, CSc.

A1
JEZIERSKI Jan
Silesian University of Technology, Gliwice, Poland, EU
Solid Particle Penetration into Liquid Alloy – an Important Issue in Metallurgical Processes - INVITED LECTURE
Co-authors: JANERKA Krzysztof
A2
STAWARZ Marcin
Silesian University of Technology, Gliwice, Poland, EU
Analysis of the High Silicon Cast Iron Crystallization Process with TDA Method
Co-authors: GROMCZYK Malwina, JEZIERSKI Jan, JANERKA Krzysztof
A3
GAUDE-FUGAROLAS Daniel
Independent Research in Physical Metallurgy and Engineering, Vilassar de Mar, Spain, EU
Prediction of Hydrogen Damage in Steels
A4
TKADLEČKOVÁ Markéta
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Prediction of Casting and Solidification of Slab Steel Ingot
Co-authors: MICHALEK Karel, MACHOVČÁK Pavel
A5
KARALIS Konstantinos
National Technical University of Athens, Athens, Greece, EU
Electromagnetic Phenomena in an Electric Submerged Arc Furnace
Co-authors: KARKALOS Nikos, ANTIPAS G.S.E, XENIDIS Anthimos
A6
KLIMEŠ Lubomír
Brno University of Technology, Brno, Czech Republic, EU
Comparison of Regulation Algorithms for Secondary Cooling of Continuous Casting Process
Co-authors: MAUDER Tomáš, ŠTĚTINA Josef
A7
HASSAN Abdelrhman
National University of Science and Technology (MISiS), Moscow, Russian Federation
Phosphorous Behavior in Electric Arc Furnace Steelmaking with the Melting of High Phosphorous Content Direct Reduced Iron
Co-authors: KOTELNIKOV Georgy, SEMIN Alexander, MEGAHED Gamal
A8
SMETANA Bedřich
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Liquidus, Solidus and other Phase Transition Temperatures and Heat Capacity of Low Carbon Steel
Co-authors: ZLÁ Simona, KAWULOKOVÁ Monika, KALUP Aleš, GRYC Karel, MARTINÍK Ondřej, DOSTÁL Petr, FRANCOVÁ Hana, DOBROVSKÁ Jana, MICHALEK Karel, STROUHALOVÁ Michaela, VÁLEK Ladislav
A9
DUDA JIŘÍ
VÍTKOVICE STEEL, a.s., Ostrava, Czech Republic, EU
Optimization of Secondary Cooling during Continuous Casting of Steel Slabs
Co-authors: ČAMEK Libor, MASARIK Miloš
A10
KALUP Aleš
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Calculation of Surface Tension of Real Steel Grades at 1550 °C
Co-authors: ZLÁ Simona, ŘEHÁČKOVÁ Lenka, KAWULOKOVÁ Monika, MARTINÍK Ondřej, DOSTÁL Petr, SMETANA Bedřich
A11
VOLKOVÁ Anežka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Volume Stability Metallurgical Slags Methodic Assessment
Co-authors: VLČEK Jozef
A12
HRABOVSKÝ Jozef
Brno University of Technology, Brno, Czech Republic, EU
The Heat Transfer Coefficient at Discontinued Water Spray Cooling
Co-authors: CHABIČOVSKÝ Martin, ASTROUSKI Ilya, KOTRBÁČEK Petr
A13
BEKEČ Pavel
ŽP Research and Development Centre, Podbrezova, Slovakia, EU
Influence of Precipitation on Branched Crack Formation in Surface Skin of Continuously-Cast Slabs of Ti-Nb HSLA Steel
Co-authors: LONGAUEROVÁ Margita, LONGAUER Svätoboj, MILKOVIČ Ondrej, TRÉFA Gabriel, GRIMPLINI Gabriel

Session B - Metal Forming

Chairmen:
Prof. Ing. Jiri KLIBER, CSc.
Assoc. Prof. Ing. Richard FABIK Ph.D.

B1
AKSENOV Sergey
National Research University Higher School of Economics, Moscow, Russian Federation
Inverse Analysis of Plane Strain and Uniaxial Compression Tests Performed on Gleeble - INVITED LECTURE
B2
KODZHASPIROV Georgy
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russian Federation
Thermomechanical Strengthening of Middle Carbon Structural Steel using Cold Deformation
Co-authors: RUDSKOY Andrey
B3
TURCZYN Stanislaw
AGH University of Science and Technology, Cracow, Poland, EU
Designing of Hot Rolling and Cooling Conditions for Dual Phase and Coplex Phase Steel Strips
Co-authors: DZIEDZIC Michal, KUZMINSKI Zbigniew
B4
PIETRZYK Maciej
AGH University of Science and Technology, Cracow, Poland, EU
Accounting for Phase Transformations in Modelling Stresses Occurring during Laminar Cooling and Coiling of Steel Strips
Co-authors: MILENIN Andrzej, KUZIAK Roman
B6
KOCICH Radim
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Experimental Analysis of Stress Conditions during Rolling
Co-authors: FOJTÍK František, KUNČICKÁ Lenka
B7
VOREL Ivan
University of West Bohemia in Pilsen, Research Centre of Forming Technology, Pilsen, Czech Republic, EU
Material-Technological Modelling of Controlled Cooling of Closed Die Forgings from Finish Forging Temperature
Co-authors: VANČURA Filip, MAŠEK Bohuslav
B8
BZOWSKI Krzysztof
AGH University of Science and Technology, Cracow, Poland, EU
New Trends in Efficient Modelling of Phase Transformations
Co-authors: PERNACH Monika, MILENIN Ivan, KUZIAK Roman, PIETRZYK Maciej
B9
NAUMOV Anton
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russian Federation
Microstructure Analysis of Heat-Resistant Ni-based Alloy after Dynamic Recrystallization
Co-authors: ZOTOV Oleg, SHAMSHURIN Aleksey, KONONOV Aleksander
B10
OGOLTSOV Alexey
AO Severstal Management, Cherepovets, Russian Federation
STAN 2000: Computer Model for Simulation of Steels Hot Rolling
Co-authors: SOKOLOV D., SOKOLOV S., VASILYEV A.
B11
DYJA Henryk
Czestochowa University of Technology, Czestochowa, Poland, EU
Analysis of Stress and Strain in Asymmetric Roll Gap
Co-authors: SZYIŃSKI Paweł, KAWAŁEK Anna, LABER Konrad
B12
KLIBER Jiří
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Behaviour of Hot and Cold rolled Fe-Mn (TWIP) Steel
Co-authors: KAWULOK Petr, SCHINDLER Ivo, KODZHASPIROV Georgij
B13
TKOCZ Marek
Silesian University of Technology, Katowice, Poland, EU
The Effect of Compression aided by Shear Stress on Material Void Closure
Co-authors: GROSMAN Franciszek
B14
FABÍK Richard
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Influence of Partial Pass on the Plastic Properties of Wire for Steel Ropes
Co-authors: VRUBLOVÁ Lucie, VYKYDAL David
B15
KUNČICKÁ Lenka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Intensive Plastic Deformation of Pre-sintered Al Powder
Co-authors: POHLUDKA Martin, JUŘICA Jan, LOWE Terry C., DAVIS Casey, HLAVÁČ Libor
B16
KAWULOK Petr
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Possibility of Grain Refinement of Low Carbon Steel by Cycling of Temperature or Deformation
Co-authors: BULAWA Marek, FOLTA Ondřej, KAWULOK Rostislav, SCHINDLER Ivo, RUSZ Stanislav, OPĚLA Petr, SUBÍKOVÁ Miroslava
B17
OMRANIAN MOHAMMADI Peiman
University of Applied Science and Technology, Center of FZA, Amol, Iran, Islamic Republic of
Investigation of Austempering Temperature on GGG70 Ductile Iron for Crankshaft of Peugeot 405
Co-authors: MOHAMMADPOUR Abolghasem, KHALILPOUR Meghdad, ALAVI Nabi
B18
CHABIČOVSKÝ Martin
Brno University of Technology, Brno, Czech Republic, EU
Heat Treatment of Tubes
Co-authors: VOTAVOVÁ Helena, HORSKÝ Jaroslav, TUROŇ Rostislav, ŠIMEČEK Pavel
B19
VOTAVOVÁ Helena
Brno University of Technology, Brno, Czech Republic, EU
Cooling Homogeneity Measurement during Hydraulic Descaling in Spray Overlapping Area
Co-authors: POHANKA Michal, BULEJKO Pavel
B20
SASAKI Shunsuke
JFE Steel Corporation, Handa, Aichi, Japan
Influence of Mandrel Rolling Conditions on Load of Mandrel Bar
Co-authors: TACHI Ryosuke, MATSUMOTO Atsushi, KATSUMURA Tatsuro, OTA Hiroki
B21
RIDZOŇ Martin
ŽP Research and Development Centre, Podbrezova, Slovakia, EU
Microstructural Aspects of Cold Forming of Precision Steel Tubes
Co-authors: MOJŽIŠ Milan, DOMOVCOVÁ Lucia, PARILÁK Ľudovít, BÍLIK Jozef
B22
NOGA Roman
Material and Metallurgical Research Ltd., Ostrava, Czech Republic, EU
Measurement of Axial Force on a Cross-rolling Mill
Co-authors: UNUCKA Petr, ARBUZ Alexandr
B23
ANDREYACHSHENKO Violetta
Karaganda State Technical University, Temirtau, Kazakhstan
Simulation of Fullering Technology as a Plastic Deformation Method for High Quality Forgings Production
B24
IBATOV Marat
Karaganda State Technical University, Temirtau, Kazakhstan
Use of Equal-channel Angular Pressing for Receiving Finished Products from Alloys of the Titan Basiss
Co-authors: ANDREYACHSHENKO Violetta
B25
GŁODZIK Marcin
AGH University of Science and Technology, Cracow, Poland, EU
Analysis of the Aluminum Formability in the Incremental Sheet Forming Process
Co-authors: NOWOSIELSKI Maciej, ŻABA Krzysztof, PUCHLERSKA Sandra
B26
ŘIHÁČEK Jan
Brno University of Technology, Brno, Czech Republic, EU
Optimization of Hydroforming Die Geometry for Manufacturing of Solar Absorbers
Co-authors: MRŇA Libor
B27
SHANMUGAVEL Balasivanandha Prabu
Anna University, Chennai, India
The Role of Corrugation Die Parameters on the Mechanical Properties of Aluminium Alloy (AA 5083) Processed by Repetitive Corrugation and Straightening
Co-authors: Thangapandian N.
B28
CONSTANTINESCU Dan
University Politehnica of Bucharest, Bucharest, Romania, EU
Particularities Regarding the Thermal Radiation in the Heating Furnaces for Metal Forming
Co-authors: CARLAN Beatrice Adriana
B29
NAIZABEKOV Abdrakhman
Rudny Industrial Institute, Rudny, Kazakhstan
Effect of Pre-heat-treatment on the Structure and Properties of Steel before Equal-Channel Angular Pressing
Co-authors: LEZHNEV Sergey, PANIN Evgeniy
B30
LEZHNEV Sergey
Karaganda State Technical University, Temirtau, Kazakhstan
Research of Influence Equal Channel Angular Pressing Combined with a Heat Treatment on the Microstructure of the Steel 45
Co-authors: NAIZABEKOV Abdrakhman, KNAPINSKI Marcin, KURAPOV Georgiy, VOLOKITINA Irina
B31
WEGLOWSKI Marek
Institute of Welding, Gliwice, Poland, EU
Experimental and Analytical Analysis of Friction Stir Processing process
B32
YAKOVLEV Sergey
Tula State University, Tula, Russian Federation
Technological Parameters of Drawing with Wall Thinning Symmetric Machine Parts of Double-layer Anisotropic Materials
Co-authors: GRYAZEV Mikhael, PILIPINKO Olga, PASYNKOV Andrey
B33
LARIN Sergey
Tula State University, Tula, Russian Federation
Pneumorming the Elements of Cellular Sheet Constructions of Square Cross Section from an Anisotropic Material
Co-authors: YAKOVLEV Sergey, PLATONOV Valeriy

Session C - Steel Products - properties

Chairmen:
Prof. Ing. Eva MAZANCOVA, CSc.

C1
SAKSL Karel
Institute of Materials Research of SAS, Kosice, Slovakia, EU
Structure of Bimetals Investigated by Synchrotron Radiation - INVITED LECTURE
Co-authors: OSTROUSHKO Dmytro, MAZANCOVÁ Eva
C2
TURAN Muhammet Emre
Karabuk University, Karabuk, Turkey
Residual Stress Measurement in Rails by Destructive and Non Destructive Method
Co-authors: ZENGIN Huseyin, OZCELIK Sait, SUN Yavuz, TUREN Yunus, AHLATCI Hayrettin, TOZLU Ibrahim
C3
AMONDARAIN Zuriñe
TECNALIA Research and Innovation, Derio (Bizkaia), Spain, EU
Failure Assesment in a H10 Hot Die Forging Tool related to Thermal Fatigue
Co-authors: MENDIA Leire, PEREZ Iñaki, LACHMANN Stefan
C4
HANUS Petr
University of Pardubice, Pardubice, Czech Republic, EU
The Possibility of Evaluating the Yield Strength through Indentation
Co-authors: SCHMIDOVA Eva, SCHMID Michal
C5
KATONA Stefan-Eusebiu
Politehnica University of Timisoara, Timisoara, Romania, EU
Investigations Regarding the Cavitation Erosion Resistance of the Al2O3 30(Ni20Al) Laser Depositions on the 17-4 Ph Stainless Steels
Co-authors: OANCA Octavian, BORDEASU Ilare, MITELEA Ion, CRACIUNESCU Corneliu Marius
C6
BALA Piotr
AGH University of Science and Technology, Cracow, Poland, EU
The Kinetics of Phase Transformations during Continuous Heating from As-quenched State of 17-4PH Steel
Co-authors: KRAWCZYK Janusz, PAWŁOWSKI Bogdan, DZIURKA Rafał, CIOS Grzegorz
C7
HAUSEROVÁ Daniela
COMTES FHT a.s., Dobřany, Czech Republic, EU
Induction Quenching of 100CrMnSi6-4 Bearing Steel after Accelerated Carbide Spheroidisation and Long-Duration Annealing
Co-authors: DLOUHÝ Jaromír, NOVÝ Zbyšek
C8
IBRAHIM Khodr
University of West Bohemia, Pilsen, Czech Republic, EU
Stabilization of Retained Austenite in High-strength Martensitic Steels with Reduced MS Temperature
Co-authors: IBRAHIM Khodr, BUBLÍKOVÁ Dagmar, JIRKOVÁ Hana, MAŠEK Bohuslav
C9
HORVÁTH Jakub
Czech Technical University in Prague, Faculty of mechanical engineering, Department of materials engineering, Prague, Czech Republic, EU
The Effect of Sigma-phase Formation on Long-term Durability of SUPER 304H Steel
Co-authors: KRÁL Petr, JANOVEC JIŘÍ, SKLENICKA Václav
C10
BOUTAREK Naima
University of Science and Technology Houari Boumediene, Algiers, Algeria
Facies and Mechanisms Involved in the Damaging Fractured Surface of a Stainless Steel Turbine Blades
Co-authors: BOULEGHEB K., BELAROUSSI H., BOUTAREK N.
C11
STREJCIUS Josef
Research Centre Rez Ltd., Rez, Czech Republic, EU
A Recent State of Knowledge on Low-Pressure Steam Turbine Rotating Blades Corrosion
Co-authors: JANOUŠEK Jaromír, SVOBODA Jaroslav
C12
SOJKA Jaroslav
VSB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava, Czech Republic, EU
Hydrogen Diffusion in the TRIP 800 Steel with Higher Phosphorus Content - Effect of Deformation
Co-authors: KULOVÁ Taťána, VÁŇOVÁ Petra, VODÁREK Vlastimil, SOZAŃSKA Maria, CHMIELA Bartosz, LELĄTKO Józef
C13
KIM Hansoo
POSTECH / GIFT, Pohang, Korea, Republic of
Microstructural Evolution in FCC/B2-duplex Low-density Steel during Annealing of Cold Rolled Sheet and Resultant Change in the Mechanical Properties
Co-authors: KIM Sang-Heon, KWON Se-Kyun, KIM Nack J.
C14
WIECZERZAK Krzysztof
AGH University of Science and Technology, Cracow, Poland, EU
Microstructural Aspects of Cast Fe-Cr-Mo-C Alloy
Co-authors: BAŁA Piotr, STĘPIEŃ Milena, CIOS Grzegorz, KOZIEŁ Tomasz
C15
OSTROUSHKO Dmytro
Institute of Materials Research of the SAS, Kosice, Czech Republic, EU
Microstructures and Base Mechanical Properties of CrxCuxMnFeNi High Entropy Alloys
Co-authors: SAKSL Karel, BALGA Dušan, SZABO Juraj, DURISIN Martin
C16
HOLEC Jan
Czech Technical University in Prague, Faculty of Mechanical Engineering, Department of Materials Engineering, Prague, Czech Republic, EU
Graphite Cast Irons Suitable for Applications in the Area of Hydraulic Machines
Co-authors: CEJP Jiří
C17
OZDEMIR Eyup
Guney Celik, Adana, Turkey
Investigation of Applicability of Alternative Aqueous Solution Bath Patenting Heat Treatment to Conventional Lead Bath Method
C18
DAVARI Mohammad
Islamic Azad University, Najafabad Branch, Faculty of Materials Engineering, Advance Materials Research Center, Najafabad, Iran, Islamic Republic of
Investigation of Fusion Zone (FZ) Size Effect on Mechanical Performance of Dissimilar Resistance Spot Welds of DP780 Dual Phase Steel/Low Carbon Steel (LCS) Joints
Co-authors: HATEFI Sahand, MANSOURI Mehdi, POURANVARI Majid
C19
HASEGAWA Kunio
VSB - Technical University of Ostrava, Center of Advanced Innovation Technologies, Ostrava / Hitachi Naka, Japan
Introduction and Definition of Laminar Flaws provided by Flaw Evaluation Code
Co-authors: STRNADEL Bohumir, LACROIX Valery
C20
KUČERA Pavel
Vítkovice Cylinders a.s., Ostrava, Czech Republic, EU
Relation between the Grainsize Development and Mechanical Properties of 34CrMo4 Steel after Four Types of Treatment
Co-authors: MAZANCOVÁ Eva
C21
JUNEK Michal
Czech Technical University in Prague, Prague, Czech Republic, EU
Life Assesment of High Pressure Steam Piping Bend Working under Conditions of Creep Damage
Co-authors: SVOBODOVÁ Marie, JANOVEC Jiří
C22
KASL Josef
Research and Testing Institute Pilsen Ltd., Pilsen, Czech Republic, EU
Creep Properties of Dissimilar Weld Joint of SteelsS COST FB2 and COST F
Co-authors: JANDOVÁ Dagmar, CHVOSTOVÁ Eva
C23
ŠVANTNER Michal
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
Active Thermography in Materials Fatigue Testing
Co-authors: VOLÁK J., HONNEROVÁ P.
C24
JANDOVÁ Dagmar
Research and Testing Institute Pilsen Ltd., Pilsen, Czech Republic, EU
Microstructure of 08Ch18N10T Austenitic Steel after Thermo-mechanical Fatigue Tests
Co-authors: FEKETE Balazs, KASL Josef, JÓNI Bertalan
C25
RYABOV Andrey
“South Ural State University” (National Research University), Chelyabinsk, Russian Federation
Environmentally Friendly Free-machining Stainless Steel without Lead
C26
DWORECKA Julita
Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw, Poland, EU
Mechanical Properties of Bearing Steel after Austempering Heat Treatment
Co-authors: JEZIERSKA Elżbieta, ROŻNIATOWSKI Krzysztof, ŚWIĄTNICKI Wiesław
C27
STRNADEL Bohumír
VSB - Technical University of Ostrava, Center of Advanced Innovation Technologies, Ostrava, Czech Republic, EU
Evaluation of Cracking Behavior of Pipeline X70 Steel from DWTT Broken Specimens
Co-authors: HASEGAWA Kunio
C28
RO Kwang Seop
SABIC, Jubail, Saudi Arabia
Enhancement of Mechanical Properties in High Strength Steels Coils for ERW Casing and Tubing Application
Co-authors: AHMED Al-Sughayir, SAYEDUR Rehman, MILIND Patil
C29
JURČI Peter
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU
Phase Constitution of Sub-zero Treated Vanadis 6 Tool Steel
Co-authors: DOMÁNKOVÁ Mária, PTAČINOVÁ Jana, HUDÁKOVÁ Mária
C30
HALFA Hossam
Central Metallurgical Research & Development (CMRDI), Cairo, Egypt
Three Main Solidification Reactions of Vanadium Modified T1 –Tungsten High Speed Tool Steel
C31
FROCISZ Łukasz
AGH University of Science and Technology, Cracow, Poland, EU
The Relationship between Tribological Properties and Microstructure of 90CrV6 Steel
Co-authors: KRAWCZYK Janusz, BAŁA Piotr, MADEJ Marcin
C32
BALÁŽOVÁ Mariana
Welding Research Institute - Industrial Institute of Slovak Republic, Bratislava, Slovakia, EU
Investigation of the Material Properties of Gradient Tubes for Biomass Power Generation Installations
Co-authors: BRZIAK Peter, BALCAR Martin, DOMOVEC Martin
C33
DZIURKA Rafal
AGH University of Science and Technology, Cracow, Poland, EU
Effect of the Additional Annealing Prior to Heat Treatment on the Final Properties of the Steel
Co-authors: CIOS Grzegorz, WIECZERZAK Krzysztof
C34
HATEFI Sahand
Advance Materials Research Center, Faculty of Materials Engineering, Najafabad Branch, Najafabad, Iran, Islamic Republic of
Similar Resistance Spot Welds of DP980 Dual Phase Steel Joints: Microstructure and Mechanical Properties
Co-authors: DAVARI Mohammad, MANSOURI Mehdi, POURANVARI Majid
C35
MORAVEC Jaromír
Technical University of Liberec, Liberec, Czech Republic, EU
The Impact of Thermal Cycles of Superheated Steam on Pipes Material of By-Pass Station of Steam and Gas-Steam Turbines
Co-authors: BRADÁČ Josef, BERAN David, NOVÁKOVÁ Iva

Session D - Modern Trends in Surface Engineering

Chairmen:
Assoc. Prof. Ing. Jitka PODJUKLOVA, CSc.
RNDr. Ivo STEPANEK

D1
WĘGRZYNKIEWICZ Sylwia
BELOS-PLP Bielsko-Biała, Bielsko-Biala, Poland, EU
The Problem with the Zinc Coating Diversification of the Hot Dip Galvanized Steel - INVITED LECTURE
D2
BÍLEK Pavel
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU
Ag Transport in Cr2N0.62 - 11Ag Nanocomposite Coating due to Thermal Affection
Co-authors: JURČI Peter, PODGORNIK Bojan, HARŠANI Marián, PRIPUTEN Pavol
D3
KREISLOVÁ Kateřina
SVÚOM Ltd., Prague, Czech Republic, EU
Corrosion Failure of Electroplated Coatings
Co-authors: GEIPLOVÁ Hana, TUREK Libor
D4
HAJDUGA Maciej
Academy of Technology and Humanities in Bielsko-Biala, Bielsko-Biała, Poland, EU
Corrosion and Bacterial Resistance of DLC COMP a-C:H, PRESSCOMP CrN and MULTICOMP TiN Coatings Used in Medical
Co-authors: HAJDUGA Maciej Błażej, WĘGRZYNKIEWICZ Sylwia, WAŚ-SOLIPIWO Joanna, HAJDUGA Marta Anna
D5
MAKSIMOVA Olga
Cherepovets State University, Cherepovets, Russian Federation
Investigation of Corrosion Resistance of Steel with Polymer Coatings: Theory and Experiment
Co-authors: DIODDIICHUK Dmitrii, MAKSIMOV Andrei
D6
HOUDKOVÁ Šárka
University of West Bohemia, Pilsen, Czech Republic, EU
Laser Sufrace Remelting of HVOF Sprayed Co-Cr-W Coating
Co-authors: VOSTŘÁK Marek, SMAZALOVÁ Eva, HRUŠKA Matěj
D7
HAJDUGA Marta Anna
Medical University of Silesia, Katowice, Poland, EU
Films VENTURESHIELD™ VS 7510 as a Way the Antibacterial Protection of Sanitary Ambulances
Co-authors: WĘGRZYNKIEWICZ Sylwia, FRANKOVÁ Jana, HAJDUGA Maciej, HAJDUGA Maciej Błażej
D9
EVIS Zafer
Middle East Technical University, Ankara, Turkey
Mechanical Investigation of AZ91D Magnesium Alloy as a Biomedical Implant
Co-authors: TAHMASEBIFAR Aydin, KAYHAN Said Murat, KOÇ Muammer Koç
D9
SKOTNICKI Wojciech
The University of Bielsko-Biala, Bielsko-Biała, Poland, EU
Influence of the Cast Iron Surface Topography on Properties of Zinc Coatings
Co-authors: JĘDRZEJCZYK Dariusz, SZŁAPA Ilona
D10
HOMOLKOVÁ Monika
University of South Bohemia in Ceske Budejovice, Laboratory of Tissue Culture, Institute of Complex Systems, Faculty of Fisheries and Protection of Waters, Nové Hrady, Czech Republic, EU
Biocompatibility of Metals and their Surfaces
Co-authors: BŘEZINA Vítězslav
D11
SIOSTRZONEK René
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Innovative Thin Coating Intended to Protect Non-ferrous Materials
Co-authors: PODJUKLOVÁ Jitka, PAVELKOVÁ Daniela, KOLDOVÁ Lenka, HANÁK Miroslav
D12
SCHUBERT Jan
Research and Testing Institute Pilsen Ltd., Pilsen, Czech Republic, EU
Influence of HVOF Sprayed Coatings on Fatigue Properties of Coating-substrate System
Co-authors: ČESÁNEK Zdeněk, HOUDKOVÁ Šárka, PRANTNEROVÁ Michaela, VOLÁK Josef
D13
ALTIN Abdullah
Yuzuncu Yıl University, Van, Turkey
Machining of Nickel Based Super Alloy based on the Taguchi Method
D14
ŠIMEČEK Jiří
University of West Bohemia, Pilsen, Czech Republic, EU
Impact Resistance of Ni-coatings
Co-authors: KOLAŘÍK Kamil, KŘÍŽ Antonín
D15
OKUYUCU Hasan
Yildirim Beyazit University, Ankara, Turkey
Investigation of Photocatalitic Properties of TiO2 Thin Film Coated on Plexy Glass
Co-authors: BAZU Taik, CELEBI Nuray
D16
MAKSIMOV Andrei
Cherepovets State University, Cherepovets, Russian Federation
Theoretical Study of the Formation of Primer Coating on the Steel Surface
Co-authors: MAKSIMOVA Olga
D17
VOSTŘÁK Marek
University of West Bohemia, Pilsen, Czech Republic, EU
Coaxial Laser Cladding: Influence of Overlap
Co-authors: HRUŠKA Matěj, HOUDKOVÁ Šárka, SMAZALOVÁ Eva
D18
MOSKAL Denys
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
Application of Shifted Laser Surface Texturing
Co-authors: KUČERA Martin, SMAZALOVÁ Eva, HOUDKOVÁ Šárka, KROMER Robin
D19
SZŁAPA Ilona
BISPOL S.A., Bielsko-Biała, Poland, EU
The Assesment of Corrosion Impact on Mechanical Properties Change of Steel Fasteners Protected by different Zinc Coatings - Stage 1
Co-authors: JĘDRZEJCZYK Dariusz, SKOTNICKI Wojciech
D20
JEDRZEJCZYK Dariusz
University of Bielsko-Biała, Bielsko-Biala, Poland, EU
The Comparison of Surface State Evaluation Accuracy of Zinc Coated Elements by Application of different Methods
Co-authors: SKOTNICKI Wojciech, SZŁAPA Ilona
D21
STUDENÝ Zbyněk
University of Defense, Brno, Czech Republic, EU
Influence of Inclusions Geometry on the Fatique Properties
Co-authors: POKORNÝ Zdeněk
D23
POKORNÝ Zdeněk
University of Defence, Brno, Czech Republic, EU
The Surface Morfology inside Cavities after Plasma Nitriding Process
Co-authors: HRUBÝ Vojtěch, POSPÍCHAL Miroslav
D24
HRUŠKA Matěj
University of West Bohemia, Pilsen, Czech Republic, EU
Laser Hardening of Milling Heads with Emphasis on Minimal Deformation
Co-authors: VOSTŘÁK Marek, SMAZALOVÁ Eva, ŠVANTNER Michal
D25
MSALLAMOVÁ Šárka
University of Chemistry and Technology Prague, Prague, Czech Republic, EU
Influence of Cathodic Protection on pH and Change of Soil Electrolyte Composition
Co-authors: NOVÁK Pavel, KOUŘIL Milan
D26
AKCA Cem
Yildiz Technical University, Istanbul, Turkey
Examination of Coating Parameters of Biopolymer Coating on AZ91D Magnesium Alloy Used as Implant in Human Body
Co-authors: ACAR Serhat, DERMAN Serap
D27
PODJUKLOVÁ Jitka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Influence of Substrate Surface Cleanliness on the Corrosion Resistance of Coating Systems
Co-authors: HANÁK Miroslav,SIOSTRZONEK René, PAVELKOVÁ Daniela, KOLDOVÁ Lenka, HRABOVSKÁ Kamila

Session E - Non-Ferrous Metals and Alloys

Chairmen:
Prof. Ing. Miroslav KURSA, CSc.
Prof. Ing. Jaromir DRAPALA, CSc.
Prof. Dr. Ing. Dalibor VOJTECH

E1
HAVLIK Tomáš
Technical University of Kosice, Kosice, Slovakia, EU
Kinetic Study and Optimization of EAF Dust Atmospheric Leaching in Sulphuric Acid Solution - INVITED LECTURE
Co-authors: KUKURUGYA František, MIŠKUFOVÁ Andrea, JAŠČIŠÁK Jan
E2
KOMÍNEK Jan
Brno University of Technology, Brno, Czech Republic, EU
Methodology of Evaluation of Heat Transfer Experiment on Aluminum Sample
Co-authors: HŘIBOVÁ Veronika, POHANKA Michal
E3
BAJER Jan
Charles University in Prague, Prague, Czech Republic, EU
Constarined Groove Pressing of Twin-Roll Cast Aluminum-Based Alloys
Co-authors: POKOVÁ Michaela, ZIMINA Mariia, ZRNÍK Jozef, MATERNA Aleš, CIESLAR Miroslav
E4
KULA Anna
AGH University of Science and Technology, Cracow, Poland, EU
Structure and Properties of Aluminum Alloys with Additions of Transition Metals produced via Coupled Rapid Solidification and Hot Extrusion
Co-authors: BLAZ Ludwik, MAKOTO Sugamata
E5
TOKARSKI Tomasz
AGH University of Science and Technology, Cracow, Poland, EU
High Strength 5083 Aluminum Alloy via Rapid Solidification and Plastic Consolidation Route
Co-authors: WĘDRYCHOWICZ Mateusz
E6
WZOREK Łukasz
AGH University of Science and Technology, Cracow, Poland, EU
Heat Treatment of Rapidly Solidified and Plastically Consolidated 6061 Aluminum Alloy
Co-authors: SKRZEKUT Tomasz
E7
MANSOURI Hasan Abadi Mehdi
Islamic Azad University Of NajafAbad, Najafabad, Iran, Islamic Republic of
Effect of Mischmetal on the Glass Forming Ability, Thermal Stability and Crystallization Behavior of Amorphous Al90-xNi10MMx (x=2-8) Alloys
Co-authors: VARAHRAM Naser, KIM J.W., PARK EunSoo, SIMCHI Abdolreza
E8
MOLNÁROVÁ Orsolya
Charles University in Prague, Prague, Czech Republic, EU
The Investigation of the Al7075+1 wt. % Zr Alloy prepared using Spark Plasma Sintering Technology
Co-authors: MÁLEK Přemysl, BECKER Hanka
E9
FIKAR Ladislav
Exova Ltd., Pilsen, Czech Republic, EU
Influence of Residual Stress Level on Fatigue Life of Aluminium Alloy Specimen and Methods of Specimen Preparation
Co-authors: KŘÍŽ Antonín
E10
ZHANG Yijie
Shanghai Jiao Tong University, School of Materials Science and Engineering, Shanghai, China
Improvement of Yield Strength of A206 Alloy
E11
ZRNÍK Jozef
COMTES FHT Inc., Dobřany, Czech Republic, EU
Prior Structure Refinement by SPD and Properties Respond of AA6082 Aluminium Alloy
Co-authors: SCHERIAU Stephan, PIPPAN Reinhard
E12
POKOVÁ Michaela
Charles University in Prague, Prague, Czech Republic, EU
Investigation of Asymmetrical Rolling applied to Twin-roll Cast Al-Mn Alloy
Co-authors: CIESLAR Miroslav, GRYDIN Olexandr
E13
WĘDRYCHOWICZ Mateusz
AGH University of Science and Technology, Cracow, Poland, EU
Effect of ECAP on the Microstructure and Mechanical Properties of Plastically Consolidated 413.0 Aluminum Alloy Chips
Co-authors: WIEWIÓRA Marcel, TOKARSKI Tomasz, CIOS Grzegorz
E14
ŠTĚPÁNEK Roman
Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Science and Engineering - NETME centre, Brno, Czech Republic, EU
Influence of Microstructure to Tensile Properties of Magnesium Alloy AZ91
Co-authors: PANTĚLEJEV Libor, MAN Ondřej
E15
ZIMINA Mariia
Charles University in Prague, Prague, Czech Republic, EU
Effect of Equal Channel Angular Pressing on Twin-roll Cast AZ31 Magnesium Strip
Co-authors: POKOVÁ Michaela, BOHLEN Jan, KURZ Geritt, LETZIG Dietmar, CIESLAR Miroslav
E16
MACHUTA Jiří
Technical University of Liberec, Liberec, Czech Republic, EU
Monitoring of Copper Alloys Structures during Solidification and Cooling of Castings
Co-authors: NOVÁ Iva
E17
BOUABDALLAH Mabrouk
Ecole Nationale Polytechnique, Algiers, Algeria
Study of Sequences of Transformations at High Temperatures of a Cu-Al-Ni Shape Memory Alloy
Co-authors: SAAD Amar, BAGUENANE Ghalia, CHENITI Hicham, CHENTOUF Samir Mourad
E18
BALGA Dušan
Institute of Materials Research of the SAS, Kosice, Slovakia, EU
Thermal Stability of Cu60Zr30Ti10 at.% Bulk Metallic Glass
Co-authors: SAKSL Karel, ĎURIŠIN Martin, SZABÓ Juraj, OSTROUSHKO Dmytro
E19
IMENE Lamiri
University of Constantine 1, Constantine, Algeria
Calorimetric, Dilatometric and Miro-hardness Study on the Propertie of the Ternary Au-Cu-Ag Alloy
Co-authors: HAMANA D.
E20
POSPÍŠILOVÁ Iva
University of Chemistry and Technology Prague, Prague, Czech Republic, EU
The Structure and Mechanical Properties of the Zn-1.6Mg Alloy prepared by Rapid Solidification
Co-authors: MACHOVÁ Markéta, VOJTĚCH Dalibor
E21
KUSÝ Martin
Slovak University of Technology, Faculty of Materials Science and Technology, Institute of Materials Science, Trnava, Slovakia, EU
Structure Characterization and Corrosion Behavior of Zn-Al-Mg Alloy with Addition of Tin
Co-authors: GONDEK Ján, BABINEC Martin
E22
JAŠČÍŠÁK Ján
Technical University of Kosice, Kosice, Slovakia, EU
Hydrometallurgical Processing of Blast Furnace Flue Dust Containing Zinc
Co-authors: HAVLIK Tomáš, HOANG TRUNG Zuzana, TUREK Peter
E23
MÁLEK Jaroslav
UJP PRAHA a.s., Prague, Czech Republic, EU
The Effect of Cold Rolling on Microstructure and Mechanical Properties of Ti-35Nb-6Ta Alloy
Co-authors: HNILICA František, VESELÝ Jaroslav, KOLAŘÍK Kamil, ČAPEK Jiří
E24
CHLUPOVÁ Alice
Institute of Physics of Materials of the AS CR, v.v.i, Brno, Czech Republic, EU
The Effect of Mo and / or C Addition on Microstructure and Properties of TiAl Alloys
Co-authors: KRUML Tomáš, ROUPCOVÁ Pavla, HECZKO Milan, OBRTLÍK Karel, BERAN Přemysl
E25
KARLÍK Miroslav
Czech Technical University in Prague, Prague, Czech Republic, EU
Phase Evolution in Ni–48at.%Ti Shape Memory Alloy prepared by Self-propagating High-temperature Synthesis
Co-authors: HAUŠILD Petr, BERAN Přemysl, NOVÁK Pavel, ČAPEK Jaroslav, KUČERA Vojtěch, KOPEČEK Jaromír
E26
NILI-AHMADABADI Mahmoud
University of Tehran, Tehran, Iran, Islamic Republic of
Evaluation of Two-way Shape Memry Effect in Bi-layer NiTi Thin Film
E27
ZHAO Liguo
Loughborough University, Loughborough, United Kingdom, EU
Cyclic Deformation, Crack Growth and Oxidation Damage for Nickel-Based Superalloys - INVITED LECTURE
E28
WANGYAO Panyawat
Chulalongkorn University, Bangkok, Thailand
Effect of Reheat Treatment Conditions on Microstructural Refurbishment in Cast Nickel Base Superalloy, MGA 1400
Co-authors: BUTSABAWAN Adchariyapluk, PIYAPAK Chantrapanichagul, MAWIN Supradist Na Ayudhaya, AIMAMON Promboobpa
E29
PROMBOOPHA Aimamorn
Kasetsart university, Bangkok, Thailand
Effect of Temperature Dropping during Solution Treatment during Rejuvenation Heat Treatment on Final Microstructures in Cast Nickel Base Superalloy, grade Inconel-738
Co-authors: PROMBOOPHA Aimamorn, POLSILAPA Sureerat, WANGYAO Panyawat
E30
HORNÍK Vít
Institute of Physics of Materials of the AS CR, v.v.i., Brno, Czech Republic, EU
Effect of different Investment Casting Conditions on High Cycle Fatigue of MAR-M 247 Superalloy at Elevated Temperatures
Co-authors: ŠMÍD Miroslav, HUTAŘ Pavel, KUNZ Ludvík, HRBÁČEK Karel, JOCH Antonín
E31
KRAWCZYK Janusz
AGH University of Science and Technology, Cracow, Poland, EU
The Effect of the Microstructure on the Tribological Properties of the Monel K500 Alloy
Co-authors: FROCISZ Łukasz, MATUSIEWICZ Piotr, MADEJ Marcin
E32
CIOS Grzegorz
AGH University of Science and Technology, Cracow, Poland, EU
Microstructural Characterization of Ni-Cr-Al-C and Ni-Cr-Nb-Al-C Alloys
Co-authors: STEPIEN Milena, WIECZERZAK Krzysztof
E33
ŠÍMA Vladimír
Charles University in Prague, Prague, Czech Republic, EU
Spark Plasma Sintering of Ball Milled and Atomized Powder based on Fe-Al
Co-authors: MINÁRIK Peter, CHRÁSKA Tomáš
E34
MENUSHENKOV Vladimir
National Research Technological University “MISIS”, Moscow, Russian Federation
Evolution of the Microstructure and Magnetic Properties of Melt Spun Fe2NiAl Alloy during Aging
Co-authors: GORSHENKOV M.V., SHETININ I.V., SAVCHENKO E.S.
E35
KUNČICKÁ Lenka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Influence of Consolidation Procedure Parameters on Compaction of Al Powder
Co-authors: LOWE Terry C., KOCICH Radim, HLAVÁČ Libor, DAVIS Casey, DVOŘÁK Jiří
E36
ÖKTEM Hasan
University of Kocaeli, Kocaeli, Turkey
Evaluation of Friction and Wear Behaviour on Non-Asbestos High Performance Brake Pads Reinforced with Organic Resources
Co-authors: KIR Durmus, UYGUR İlyas, AKINCIOGLU Gülsah, KARAKAS Hamdi
E37
SIDOROV Evgeny
Vladimir State University, Vladimir, Russian Federation
Peculiarities of Obtaining Dendrite Single Crystals of Solid Solution Alloys

Session F - Economics and Management of Metallurgical Production

Chairmen:
Prof. Ing. Radim LENORT, Ph.D.
Assoc. Prof. Dorota BURCHART-KOROL, Ph.D.
Prof. Ing. Darja NOSKIEVICOVA, CSc.
Assoc. Prof. Ing. Iveta VOZNAKOVA, Ph.D.

F1
NOWICKA-SKOWRON Maria
Czestochowa University of Technology, Czestochowa, Poland, EU
Quality Management in Logistics Processes in Metal Branch - INVITED LECTURE
Co-authors: ULEWICZ Robert
F2
MALINDŽÁK Dušan
Technical University in Kosice, Kosice, Slovakia, EU
The Production Scheduling for Continuous-discrete Metalurgical Process
Co-authors: KAČMARY Peter, ZIMON Dominik
F3
MICHLOWICZ Edward
AGH University of Science and Technology, Cracow, Poland, EU
The Impact of Modernization on the Productivity of a Multi-stage Production of Transformer Sheets
Co-authors: SMOLINSKA Katarzyna
F4
SHIGEMORI Hiroyasu
JFE Steel Corporation, Fukuyama, Japan
Cooling Temperature Control for Steel Plates through Locally Weighted Regression Model
F5
ŠPIČKA Ivo
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Comparison of Models for Optimal Control of Selected Metallurgical Aggregates
Co-authors: HEGER Milan, ZIMNÝ Ondřej, BAHENSKÝ Ivo
F6
FELIKS Jerzy
AGH University of Science and Technology, Cracow, Poland, EU
Agent-based Modeling of Steel Production Processes under Uncertainty
Co-authors: MAJEWSKA Katarzyna
F7
BURCHART-KOROL Dorota
Central Mining Institute, Katowice, Poland, EU
The Importance of LCA in the Management of Natural Resources in Steel Industry
F8
TOŠENOVSKÝ Josef
VSB - Technical university of Ostrava, Karvina, Czech Republic, EU
Use of Robust Characteristics for Modelling of Metalurgical Processes
Co-authors: TOŠENOVSKÝ Filip, SMAJDOROVÁ Tereza, GROWKOVÁ Vendula
F9
PETERKOVÁ Jindra
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Approach to Innovation and Innovative Industrial Enterprise Infrastructure
Co-authors: LUDVÍK Ladislav
F10
WILK-KOŁODZIEJCZYK Dorota
Foundry Research Institute, Cracow, Poland, EU
Metallurgical Knowledge Components Management via Ontological Model
Co-authors: REGULSKI Krzysztof, ROJEK Gabriel, KLUSKA-NAWARECKA Stanisława
F11
VOZŇÁKOVÁ Iveta
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Diagnosis Costs in the Metallurgical Enterprise
Co-authors: KRAWCZYK-SOŁTYS Agnieszka
F12
BAKALARCZYK Sebastian
Lodz University of Technology, Lodz, Poland, EU
Innovation Absorption in Polish Metallurgical Enterprises
F13
POMYKALSKI Przemysław
Lodz University of Technology, Lodz, Poland, EU
Concepts and Trends in Corporate R&D Expenditures in Metallurgy
F14
ZAPLETAL František
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Influence of the Emission Prices and Banking of Allowances on Steel Companies in the Czech Republic
Co-authors: CHYTILOVÁ Lucie
F15
CHYTILOVÁ Lucie
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
An Efficiency Evaluation of Emission Allowances for EU Countries with the Use of the Zero Sum Game Data Envelopment Analysis
Co-authors: ZAPLETAL František
F16
KADŁUBEK Marta
Czestochowa University of Technology, Czestochowa, Poland, EU
The Conditions for Logistics in the Metallurgical Company
F17
KLAPALOVÁ Alena
Masaryk University, Brno, Czech Republic, EU
Reverse Logistics Management, Drivers and Profitability - Metal versus Other Industries
F18
SANIUK Anna
University of Zielona Gora, Zielona Gora, Poland, EU
Order Management in Metallurgical Production
Co-authors: Sebastian SANIUK, Miloš ČAMBÁL, Marek JAKIMOWICZ
F19
INGALDI Manuela
Częstochowa University of Technology, Czestochowa, Poland, EU
Evaluation of the Processes Stability in Metal Industry
F20
PAWLICZEK Adam
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Selected Important Macroeconomic Factors and Development of Ironworks Production Prices
Co-authors: CHLOPECKÝ Jakub, VLADÍK Vít
F21
HUDEC Zdeněk
Technical University of Liberec, Liberec, Czech Republic, EU
The Key to Economy of Welded Structures Production
F22
KWIATKOWSKI Michał
AGH University of Science and Technology, Cracow, Poland, EU
Influence of Wax Assembly and Ceramic Mould Status on Product Quality in Investment Casting of Jet Engine Critical Parts
Co-authors: ŻABA Krzysztof, POCIECHA Daniel, CYGAN Rafał
F23
KRANNICH Marek
Silesian University of Technology, Zabrze, Poland, EU
Positive Orientation in the Management of the Steel

Poster session A

Chairmen:
Ing. Jaroslav BREZINA
Assoc. Prof. Ing. Libor CAMEK, Ph.D.
Prof. Ing. Karel MICHALEK, CSc.

PA1
DRÁPALA Jaromír
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Study of Segregation Phenomena of Non-ferrous and Rare Earth Metals at the Solidification of a Low-carbon 42CrMo4 Steel - POSTER
Co-authors: BROŽOVÁ Silvie, MADAJ Michal, VU The Ha, KOSTIUKOVÁ Gabriela , SZURMAN Ivo , KONEČNÁ Kateřina, MACHOVČÁK Pavel, JONŠTA Petr, KLOSOVÁ Kateřina
PA2
GRYC Karel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Influence of Experimental Cconditions of the Direct Thermal Analysis Method on the Course of Cooling for Selected Metallic Systems - POSTER
Co-authors: STROUHALOVÁ Michaela, SMETANA Bedřich, KAWULOKOVÁ Monika, ZLÁ Simona, MICHALEK Karel, KALUP Aleš
PA3
KOVÁŘ Ladislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Bottom Tuyeres of High-temperature Units - Division, Requirements and Selected Operating Parameters - POSTER
PA4
KRATOCHVÍL Michal
VSB - Technical University of Ostrava, Institute of Mining Engineering and Safety, Ostrava, Czech Republic, EU
Possibilities to Improve the Mechanical and Physical Properties of Slag for its Secondary Utilization - POSTER
Co-authors: ZEGZULKA Jiří, BOTULA Jiří, JEZERSKÁ Lucie, HLOSTA Jakub, NEČAS Jan
PA5
KRČEK Břetislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Mathematical 3D Model of Motion of Burden Materials in the Bell-less Blast Furnace Top after Leaving the Rotating Chute - POSTER
PA7
SOCHA Ladislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Reduction of Chromium Oxides from the Slag at Production of Alloyed Steels - POSTER
Co-authors: ADOLF Zdeněk, BAŽAN Jiří, MACHOVČÁK Pavel
PA8
ŠTĚTINA Josef
Brno University of Technology, Brno, Czech Republic, EU
Numerical Models and their Indispensability for Flexible Control of Continuous Steel Casting - POSTER
Co-authors: MAUDER Tomáš, KLIMEŠ Lubomír, KAVIČKA František

Poster session B

Chairmen:
Prof. Ing. Jiri KLIBER, CSc.
Assoc. Prof. Ing. Richard FABIK Ph.D.

PB1
BOREK Wojciech
Silesian University of Technology, Gliwice, Poland, EU
Structure and Mechanical Properties of High-Mn TWIP Steel after their Thermo-mechanical and Heat Treatments - POSTER
Co-authors: TAŃSKI Tomasz, JONŠTA Zdeněk, JONŠTA Petr, ČÍŽEK Lubomir
PB2
CHYŁA Paweł
AGH University of Science and Technology, Cracow, Poland, EU
Forging of Gas Turbine Shaft - Numerical Modelling of Technological Process - POSTER
Co-authors: ŁUKASZEK-SOŁEK Aneta, BEDNAREK Sylwia
PB3
GREGER Miroslav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Influence of Degree of Thickness Reduction Ratio on Development of Structure in the Steel 1.5710 - POSTER
Co-authors: PETRŽELA Jiří, LÁSZLÓ Vladimír, HORSINKA Jaromír, MAŠEK Václav, DLUGOŠ Ivan
PB4
GROSMAN Franciszek
Silesian University of Technology, Katowice, Poland, EU
A Review of Modern Incremental Metal-forming Processes - POSTER
Co-authors: TKOCZ Marek
PB5
HADASIK Eugeniusz
Silesian University of Technology, Katowice, Poland, EU
Formability of Steels for Rolling of Wire Rod - POSTER
Co-authors: HADASIK Eugeniusz, PŁACHTA Adam, KUC Dariusz, TKOCZ Marek, NIEWIELSKI Grzegorz, MRUGAŁA Agata
PB6
HILŠER Ondřej
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Utilization of New Forming Technology to Production of UFG Materials in Industrial Practice - POSTER
Co-authors: RUSZ Stanislav, SALAJKA Michal, BOŘUTA Josef, ČÍŽEK Lubomír
PB7
KAWULOK Rostislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Effect of Plastic Deformation on CCT Diagram of Spring Steel 51CrV4 - POSTER
Co-authors: SCHINDLER Ivo, KAWULOK Petr, RUSZ Stanislav, OPĚLA Petr, MALIŠ Michael, VAŠEK Zdeněk, SUBÍKOVÁ Miroslava, VÁŇOVÁ Petra
PB8
KUC Dariusz
Silesian University of Technology, Katowice, Poland, EU
High-temperature Characteristics of Plasticity of Mg-Y-RE-Zr Alloy - POSTER
Co-authors: KUC Dariusz, HADASIK Eugeniusz, MRUGAŁA Agata
PB9
KWAPISZ Marcin
Czestochowska Univeristy of Technology, Częstochowa, Poland, EU
Perturbation Factors of Uniaxial Compression Test in Gleeble 3800 System - POSTER
Co-authors: KNAPIŃSKI Marcin, DYJA Henryk, KAWAŁEK Anna, SAWICKI Sylwester
PB10
LABER Konrad
Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland, EU
Determination of the optimal conditions for the controlled cooling process for 20MnB4 steel wire rod - POSTER
Co-authors: Koczurkiewicz Bartosz
PB11
ŁUKASZEK-SOŁEK Aneta
AGH University of Science and Technology, Cracow, Poland, EU
Hot Workability Analysis of Ni55Cr45 Alloy with Processing Maps - POSTER
Co-authors: ŚWIĄTONIOWSKI Andrzej, CELADYN Krzysztof
PB12
MIŁEK Tomasz
Kielce University of Technology, Kielce, Poland, EU
Evaluation of the Possibility of Diameter Reduction in MT 1020 Steel Tubes by Rolling on the WPM-120 Cold Profile Eccentric Rolling Machine - POSTER
Co-authors: KOPACZ Zenon
PB13
OPĚLA Petr
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Influence of Niobium Content on Hot Flow Stress of HSLA Steels - POSTER
Co-authors: HOFER Roman, SCHINDLER Ivo, KAWULOK Petr, HRUŠKA Miroslav, KAWULOK Rostislav, RUSZ Stanislav
PB14
PUCHLERSKA Sandra
AGH University of Science and Technology, Cracow, Poland, EU
Microstructure Identification of Nickel Superalloy Processed in Shear Forming - POSTER
Co-authors: ŻABA Krzysztof, KWIATKOWSKI Michał, NOWOSIELSKI Maciej, KITA Paweł
PB15
RUDAEV Yakov
Kyrgyz-Russian Slavic University, Bishkek, Kyrgyzstan
Modelling of Longitudinal Rolling Procedure of Aluminum Sheet under Superplasticity Conditions - POSTER
Co-authors: KODZHASPIROV Georgii, KITAEVA Daria, SUBBOTINA Elena
PB16
RUMYANTSEV Mikhail
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russian Federation
Prediction Model of the Flow Stress for the Automatical Computer-assistant Engineering Hot Rolling Sheet and Strips Pattern - POSTER
Co-authors: BELOV Vladimir, RAZGULIN Igor
PB17
RUSZ Stanislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
An Investigation of the Deformation Behaviour of the Nickel Alloys IN 713 LC and MAR M-247 - POSTER
Co-authors: SCHINDLER Ivo, HRBÁČEK Karel, KAWULOK Petr, KAWULOK Rostislav, OPĚLA Petr
PB18
RUSZ Stanislav
VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Ostrava, Czech Republic, EU
Study of the Properties of UFG Materials after the Application of New Forming Methods - POSTER
Co-authors: SALAJKA Michal, KRAUS Martin, HILŠER Ondřej, KLOS Marcel, ČÍŽEK Lubomír
PB19
SOBOTKA Jiří
Technical University of Liberec, Liberec, Czech Republic, EU
Determination of Strain Gradient Change Influence at the Bore Expansion Test - POSTER
Co-authors: SOLFRONK Pavel, KOLNEROVÁ Michaela, ZUZÁNEK Lukáš
PB20
SOBOTKA Jiří
Technical University of Liberec, Liberec, Czech Republic, EU
Input Material Data for Advance Computational Models for Forming Stainless Material - POSTER
Co-authors: SOLFRONK Pavel, KOLNEROVÁ Michaela, ZUZÁNEK Lukáš
PB21
SOLFRONK Pavel
Technical University of Liberec, Liberec, Czech Republic, EU
Utilization of Advanced Computational Models for Drawing Process Numerical Simulation of Titanium Alloy - POSTER
Co-authors: SOBOTKA Jiří, KOLNEROVÁ Michaela, ZUZÁNEK Lukáš
PB22
SOLFRONK Pavel
Technical University of Liberec, Liberec, Czech Republic, EU
Utilization of HS Cameras for Analysis Deformation Limit States of Steel Sheets - POSTER
Co-authors: MORAVEC Jaromír, SOBOTKA Jiří, KOLNEROVÁ Michaela
PB23
THOMAS Piotr
Kielce University of Technology, Kielce, Poland, EU
Experimental Studies of Combined Extrusion of Parts Made of ENAW-1050A Alloy - POSTER
PB24
VYKYDAL David
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Using of Design of Experiments for Describing of Impact of Cold Drawing Process Parameters on Plastic Properties of Wire for Steel Ropes - POSTER
PB25
WOŹNIAK Dawid
AGH University of Science and Technology, Cracow, Poland, EU
Numerical and Experimental Forming of Axisymmetric Products using Flow Forming Method for Hard-to-deform Material - POSTER
Co-authors: HOJNY Marcin, GŁOWACKI Mirosław, GĄDEK Tomasz

Poster session C

Chairmen:
Prof. Ing. Eva MAZANCOVA, CSc.

PC1
ADAMASZEK Krzysztof
BOSMAL Automotive Research and Development Institute Ltd., Bielsko-Biala, Poland, EU
Influence of Fatty Acid Methyl Esters Quantities in Fuel Oil on Corrosion Resistance of Valve Steels in Combustion Gases - POSTER
Co-authors: NOWAK Jan, JURASZ Zbigniew
PC2
ANDRŠOVÁ Zuzana
Technical University of Liberec, Liberec, Czech Republic, EU
The Use of Magnetic and Ultrasonic Structuroscopy for the Process Control of Austempered Irons - POSTER
Co-authors: VOLESKÝ Lukáš, SKRBEK Břetislav, ŠEJNOHOVÁ Ivana
PC3
BULÍN Tomáš
Brno University of Technology, Brno, Czech Republic, EU
Magnetic and Transport Properties of 41CrMo4 Steel - POSTER
Co-authors: HAPLA Miroslav, ROUPCOVÁ Pavla, ONDRŮŠEK Čestmír, SCHNEEWEISS Oldřich
PC4
BURIK Peter
Technical University of Liberec, Liberec, Czech Republic, EU
Effect of Crystallographic Orientation on the Mechanical Properties of Steel Sheets by Depth Sensing Indentation - POSTER
Co-authors: PEŠEK Ladislav
PC5
CIEŚLA Marek
Silesian University of Technology, Katowice, Poland, EU
Low-cycle Fatigue Characteristics of 2017A Aluminium Alloy, AZ31 Magnesium Alloy and Ti-6Al-4V Titanium Alloy - POSTER
Co-authors: JUNAK Grzegorz
PC6
DOBROVSKÁ Jana
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Phase Transformations Temperatures of Real Steel Grade - POSTER
Co-authors: KAWULOKOVÁ Monika, ZLÁ Simona, DOBROVSKÁ Jana, SMETANA Bedřich, KALUP Aleš, STROUHALOVÁ Michaela, VONTOROVÁ Jiřina, VÁLEK Ladislav, ROSYPALOVÁ Silvie, FRANCOVÁ Hana
PC7
DOMAŃSKI Tomasz
Częstochowa Univerisity of Technology, Czestochowa, Poland, EU
Numerical Analysis of Microstructure and Stress generated by Heat Treated of Steel Elements - POSTER
Co-authors: BOKOTA Adam, PIEKARSKA Wiesława, KUBIAK Marcin
PC8
ELIÁŠOVÁ Ivana
ÚJV Řež, a. s., Prague, Czech Republic, EU
Characterization of Mechanical Properties using by Instrumented Hardness Test Method - POSTER
Co-authors: FALCNÍK Michal, KOPŘIVA Radim
PC9
GASAN Hakan
Eskisehir Osmangazi University, Eskisehir, Turkey
Effect of Cryogenic Treatment on The Mechanical Properties of Compacted Graphite Cast Iron - POSTER
Co-authors: AKIN Civan Mert
PC10
GAWRONSKA Elzbieta
Czestochowa University of Technology, Czestochowa, Poland, EU
Numerical Study of Thermal and Structural Strains in Multipass GMAW Surfacing and Rebuilding - POSTER
Co-authors: WINCZEK Jerzy
PC11
GHERA Cristian
Politehnica University of Timisoara, Timisoara, Romania, EU
Improvement of Cavitation Erosion Resistance of a Low Alloyed Steel 16MnCr5 through Work Hardening - POSTER
Co-authors: MITELEA Ion, BORDEAŞU Ilare, CRĂCIUNESCU Corneliu
PC12
GOŁASZEWSKI Adam
Warsaw University of Technology, Warsaw, Poland, EU
Optimisation of the TRIP Steels Microstructure and its Properties through a New Heat Treatment Process - POSTER
Co-authors: SZAWŁOWSKI Jerzy, ŚWIĄTNICKI Wiesław
PC13
GÓRECKI Kamil
AGH University of Science and Technology, Cracow, Poland, EU
Analysis of Pitting Wear Phenomena in 30CrMoV9 Steel Samples with Si-DLC Coating - POSTER
Co-authors: CIOS Grzegorz, STĘPIEŃ Milena, MARZEC Mateusz, WIECZERZAK Krzysztof
PC14
HAVELKA Lukáš
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Mechanical Properties of P92 Welded Joints made by GTAW Technology - POSTER
Co-authors: MOHYLA Petr, VONTOROVÁ Jiřina
PC15
IVANOV Sergei
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russian Federation
Optimisation Technique for Arc Welding of Structured Sheet - POSTER
Co-authors: KARKHIN Victor, MICHAILOV Vesselin, PANCHENKO Oleg
PC16
JANSTO Steven
CBMM-Reference Metals Company, Bridgeville, United States
Reheat Furnace Operational Parameters Affecting Hot Roll Quality of Microalloyed Long Products - POSTER
PC17
JURASZ Zbigniew
BOSMAL Automotive Research and Development Institute Ltd., Bielsko-Biała, Poland, EU
Influence of Ethanol Percentage in Petrol on Corrosion Resistance of Valve Steels in Combustion Engine Gases - POSTER
Co-authors: ADAMASZEK krzysztof
PC18
KÁŇA Josef
University of West Bohemia in Pilsen, Regional Institute of Technology (RTI), Pilsen, Czech Republic, EU
A Comparative Study of Algorithms used for Automated Evaluation of the Tensile Tests Results - POSTER
Co-authors: JENÍČEK Štěpán
PC19
KANDER Ladislav
MATERIAL AND METALLURGICAL RESEARCH Co., Ltd., Ostrava, Czech Republic, EU
Evaluation of Effect of Sigma Phase on Mechanical Properties of Tp347 HFG Austenitic Steel after Long Term Service using Miniaturized and SPT Test Specimens - POSTER
Co-authors: KORCAKOVA Leona
PC20
KOCZURKIEWICZ Bartosz
Czestochowa University of Technology, Czestochowa, Poland, EU
The Influence of Cooling Conditions on Pearlte Morphology of High Carbon Wire Rods - POSTER
Co-authors: KUC Dariusz, DYJA Henryk, NIEWIELSKI Grzegorz
PC21
KOLNEROVÁ Michaela
Technical University of Liberec, Liberec, Czech Republic, EU
Influence of Material Cutting on the Cyclic Fatigue of TRIP Steel - POSTER
Co-authors: SOLFRONK Pavel, SOBOTKA Jiří, ZUZÁNEK Lukáš
PC22
KONOPÍK Pavel
COMTES FHT a.s., Dobrany, Czech Republic, EU
Determination of Fracture Toughness in the Upper Shelf Region using Small Sample Test Techniques - POSTER
Co-authors: DŽUGAN Jan, PROCHÁZKA Radek, RUND Martin
PC23
KOSNO Lukasz
Kielce University of Technology, Kielce, Poland, EU
Behaviour Analys of Steel-shell-and-soil Corrugated Structure in the Construction Phase Illustrated with SuperCor SC-57S - POSTER
PC24
KRAJCARZ Daniel
Kielce University of Technology, Kielce, Poland, EU
Influence Traverse Speed on Surface Quality after Water-jet Cutting for Hardox Steel - POSTER
Co-authors: SPADŁO Sławomir, HLAVAC Libor
PC25
KRÁL Lubomír
Institute of Physics of Materials of the AS CR, v.v.i., Brno, Czech Republic, EU
The Changes in Structure of Steel P91 after Short Annealings - POSTER
Co-authors: ČERMÁK Jiří
PC26
KUBIAK Marcin
Czestochowa University of Technology, Institute of Mechanics and Machine Design Foundations, Czestochowa, Poland, EU
Numerical Modelling of Stress State and Deformations in Laser Butt-welded Sheets made of X5CrNi18-10 Steel - POSTER
Co-authors: PIEKARSKA Wiesława, SATERNUS Zbigniew, DOMAŃSKI Tomasz
PC27
KUBOŇ Zdeněk
MATERIAL AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU
Structural Degradation of Steam Pipe Bend made of 0.5Cr-0.5Mo-0.3V Steel after Long-term Creep Exposure - POSTER
Co-authors: KOSŇOVSKÁ Jana, PEKAŘOVÁ Lenka
PC28
KUFA Jan
MATERIAL AND METALLURGICAL RESEARCH Ltd., Ostrava, Czech Republic, EU
Software for the Evaluation of Segregation in Wire Rod - POSTER
PC29
LIPIŃSKI Tomasz
Uniwersity of Warmia and Mazury, Olsztyn, Poland, EU
Effect Size Proportions and Distances between the Non-metallic Inclusions on Bending Fatigue Strength of Structural Steel - POSTER
Co-authors: WACH Anna
PC30
MAHMOUD Houssam
Brno University of Technology, Brno , Czech Republic, EU
Simulation of Operational Loading of Pressure Equipment by means of Non-destructive Testing - POSTER
Co-authors: VLASIC Frantisek, MAZAL Pavel
PC31
MAJTÁS Dušan
Centre of Excellence Telč, Institute of Theoretical and Applied Mechanics of the AS CR v.v.i., Telc, Czech Republic, EU
Cracking of Ferritic Stainless Steel Tubes during Production Process - POSTER
Co-authors: KREISLOVÁ Kateřina, VIANI Alberto, ESTÉBANEZ Marta Pérez, GEIPLOVÁ Hana
PC32
MAKAREVIČIUS Vidas
Lithuanian energy institute, Kaunas, Lithuania, EU
Transformation of M23C6 Carbide Lattice Parameters in Ferritic-Martensitic P91 Steel during Thermal Ageing - POSTER
Co-authors: GRYBĖNAS Albertas, BALTUŠNIKAS Arūnas, LUKOŠIŪTĖ Irena, KRIŪKIENĖ Rita
PC33
MARCINIAK Szymon
Warsaw University of Technology, Warsaw, Poland, EU
The Effect of Stepped Austempering on Phase Composition and Mechanical Properties of Nanostructured X37CrMoV5-1 Steel - POSTER
Co-authors: SKOŁEK Emilia, ŚWIĄTNICKI Wiesław
PC34
MAZANCOVÁ Eva
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Hydrogen Susceptibility of Explosively Welded Anticorrosion Steel and Titanium of Commercial Purity - POSTER
Co-authors: OSTROUSHKO Dmytro, SAKSL Karel, KUČERA Pavel
PC35
MICU Lavinia Madalina
University Politehnica Timisoara, Timisoara, Romania, EU
The Transformations Morphology by Cavitation Erosion of Gas Nitrited X2CrNiMoN 22-5-3 Duplex Stainless Steel - POSTER
Co-authors: MITELEA Ion, BORDEASU Ilare, CRACIUNESCU Corneliu Marius
PC36
MŁYNARCZYK Piotr
Kielce University of Technology, Kielce, Poland, EU
The Selected Properties of the Connection Superalloy Haynes H 230® using Microwelding - POSTER
Co-authors: SPADŁO Sławomir, DEPCZYŃSKI Wojciech, ŚLIWA Edyta, STRZĘBSKI Damian
PC37
MOHAMED Benabdeslem
University of Annaba, Department of Physics, Annaba, Algeria
Ab Initio Calculations and Experimental Properties of CuAlxGa1-xTe2 for Photovoltaicsolar Cells - POSTER
Co-authors: SEHLI H., RAHAL S., BENSLIM N., BECHIRI L., DJEKOUN A., TOUAM T., BOUJNAH M., EL KENZ A., BENYOUSSEF A., PORTIER X.
PC38
MRZYGŁÓD Barbara
AGH University of Science and Technology, Cracow, Poland, EU
The Study Phase Transformations in Nodular Cast Iron with Additions of Ni, Cu, Mo - POSTER
Co-authors: OLEJARCZYK-WOŻEŃSKA I., ADRIAN H., KOWALSKI A., GŁOWACKI M.
PC39
OANCA Octavian
Politehnica University of Timisoara, Timisoara, Romania, EU
Innovative Technologies to Increase the Cavitation Erosion Resistance of Bronzes AMPCO M4 - POSTER
Co-authors: BORDEASU Ilare, MITELEA Ion, CRACIUNESCU Corneliu Marius, SÎRBU Nicusor Alin
PC40
OCHODEK Vladislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Plasma Welding of High Carbon Steel after SPD Process - POSTER
Co-authors: HORÁK Přemysl
PC41
OLEJARCZYK-WOZENSKA Izabela
AGH University of Science and Technology, Cracow, Poland, EU
Numerical Modelling of Austenite-ferrite Transformation in ADI - POSTER
Co-authors: ADRIAN Henryk, MRZYGŁÓD Barbara, GŁOWACKI Mirosław
PC42
PALAMARCIUC Ion
Gheorghe Asachi Technical University of Iasi, Iasi, Romania, EU
Influence of Steel Contamination in Petroleum Products on Formation of Non-metallic Inclusions - POSTER
Co-authors: GALUSCA Dan Gelu, MANHART Jacob, OKOLIE Norbert
PC43
PAWŁOWSKI Bogdan
AGH University of Science and Technology, Cracow, Poland, EU
The Effect of Alloying Elements on the Temperature Range of Pearlite to Austenite Transformation in Low Alloy Hypoeutectoid Steels - POSTER
Co-authors: BAŁA Piotr, DZIURKA Rafał
PC44
PIEKARSKA Wiesława
Częstochowa University of Technology, Institute of Mechanics and Machine Design Foundations, Częstochowa, Poland, EU
Analytical Methods for the Analysis of Phase Transformations in Solid State Occurring during Welding - POSTER
Co-authors: GOSZCZYŃSKA Dorota
PC45
PIŇOS Jakub
Institute of Scientific Instruments of the AS CR, v.v.i., Brno, Czech Republic, EU
Analysis of UFG Steels with Low Energy Electron Microscopy - POSTER
Co-authors: FRANK Luděk, PATÁK Aleš
PC46
RAMEZANZADE NOGHONDAR Shadi
Hakim Sabzevari University, Sabzevar, Iran, Islamic Republic of
The Effect of Isothermal Heat Treatment on Microstructure of Cu Containing Ductile Irons - POSTER
PC47
ROZUMOVÁ Lucia
Research Centre Rez Ltd., Rez, Czech Republic, EU
The Effects of High Temperature Helium Gas on the Fracture Behaviour of MA957 and EUROFER97 - POSTER
PC48
SALCIANU Laura Cornelia
Politehnica University of Timisoara, Timisoara, Romania, EU
Duration of the Austenitization and Cavitation Erosion Resistance of Stainless Steel X5CrNi18-10 - POSTER
Co-authors: BORDEAŞU Ilare, MITELEA Ion, CRĂCIUNESCU Corneliu Marius
PC49
SAMIR Mansour
University of Science and Technology Houari Boumediene, Algiers, Algeria
Competition between Eutectics Structures Crystallisation in the Fe-Cr-Nb Phase Equilibrium - POSTER
PC50
SCHMIDOVA Eva
University of Pardubice, Pardubice, Czech Republic, EU
Effect of Rolling Contact Fatigue on the Elastic-Plastic Response of Hadfield Steel - POSTER
Co-authors: CULEK Bohumil, KAYA Utku
PC51
SKOŁEK Emilia
Warsaw University of Technology, Warsaw, Poland, EU
Wear Resistance of Nanocrystalline X37CrMoV5-1 Steel after Hydrogen Charging - POSTER
Co-authors: MARCIANIAK Szymon, KAMIŃSKI Janusz, ŚWIĄTNICKI Wiesław
PC52
ŠKORÍK Viktor
Institute of Physics of Materials of the AS CR, v.v.i., Brno, Czech Republic, EU
Thermomechanical and Isothermal Fatigue Behavior of Austenitic Stainless Steel AISI 316L - POSTER
Co-authors: ŠULÁK Ivo, OBRTLÍK Karel, POLÁK Jaroslav
PC53
SKOUMALOVÁ Zuzana
Nuclear Research Institute Rez Inc., Rez, Czech Republic, EU
Selection of Compatible Material for Supercritical Power Plants - POSTER
PC54
SMOLJAN Božo
University of Rijeka, Faculty of Engineering, Rijeka, Croatia
Mathematical Modelling and Computer Simulation of Steel Quenching - POSTER
Co-authors: ILJKIĆ Dario, POMENIĆ Loreta
PC55
SPADŁO Sławomir
Kielce University of Technology, Kielce, Poland, EU
Investigation of the Selected Properties of the Superficial Layer Alloying with the Tungsten Electrodes - POSTER
Co-authors: MŁYNARCZYK Piotr, DEPCZYŃSKI Wojciech
PC56
STEFANIK Andrzej
Czestochowa University of technology, Czestochowa, Poland, EU
Model of the Microstructure Evolution for the Steel with Boron for a Cold Upsetting - POSTER
Co-authors: KOCZURKIEWICZ Bartosz
PC57
STRADOMSKI Grzegorz
Technical University of Częstochowa, Czestochowa, Poland, EU
The X2CrNiMo25-6-3 Duplex Steel Plasticity - Complementation - POSTER
PC58
STRÁNSKÝ Marek
Brno University of Technology, Faculty of Mechanical Engineering, Laboratory of Heat Transfer and Fluid Flow, Brno, Czech Republic, EU
Effect of Various Spray Cooling Configurations on Hardness Profile of Tubes - POSTER
Co-authors: BROŽOVÁ Tereza, RAUDENSKÝ Miroslav, HNÍZDIL Milan, TUROŇ Rostislav
PC59
ŠVÁBENSKÁ Eva
Institute of Physics of Materials of the AS CR, v.v.i., Brno, Czech Republic, EU
Analysis of the Surface Layere of the Brake Disc - POSTER
Co-authors: ROUPCOVÁ Pavla, PODSTRANSKÁ Ivana, PETR Martin, FILIP Jan, SCHNEEWEISS Oldřich
PC60
ULEWICZ Robert
Czestochwa University of Technology, Czestochowa, Poland, EU
Fatigue Properties of ADI Cast Iron - POSTER
Co-authors: NOVY Franisek
PC61
URLAN Dumitru Sorin
Politehnica University of Timisoara, Timisoara, Romania, EU
Microstructure of the Pulsed MIG / MAG Welded Joints from Duplex Stainless Steel X2CrNiMoN 22-5-3 - POSTER
Co-authors: MITELEA Ion, UTU I.D., BURCA M.
PC62
VODÁREK Vlastimil
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Microstructural Parameters and Mechanical Properties of the Thermally Simulated HAZ Samples of T24 Steel - POSTER
Co-authors: SZTEFEK Radek, SCHWARZ Drahomír, JAROLÍMOVÁ Mária
PC63
WASIAK Krzysztof
Warsaw University of Technology, Warsaw, Poland, EU
Wear Resistance and Mechanical Properties of 35CrSiMn5-5-4 Steel after Quenching & Partitioning Process - POSTER
Co-authors: SKOŁEK Emilia, ŚWIĄTNICKI Wiesław
PC64
WINCZEK Jerzy
Czestochowa University of Technology, Czestochowa, Poland, EU
Analytical Description of Thermal and Structural Strains in Multipass GMAW Surfacing and Rebuilding - POSTER
Co-authors: GAWROŃSKA Elżbieta
PC65
ZEHIRA Belamri
University of Mentouri-Constantine, Constantine, Algeria
Effect of Thermal History on the Formation of D03 Ordered Structure in Fe-Ga Alloys - POSTER
Co-authors: HAMANA D.
PC67
ZIELIŃSKI Tomasz
Kielce University of Technology, Kielce, Poland, EU
Increasing Carrying Capacity of Columns in Steel Hall Beyond Increasing Inflexibility of Extent - POSTER

Poster session D

Chairmen:
Assoc. Prof. Ing. Jitka PODJUKLOVA, CSc.
RNDr. Ivo STEPANEK

PD1
BABINEC Martin
Slovak University of Technology, Faculty of Materials Science and Technology, Trnava, Slovakia, EU
Assessment of Corrosion Resistance of Zn-Al-Mg Alloy with Various Amount of Sn - POSTER
PD2
BAŃKOWSKI Damian
Kielce University of Technology, Kielce, Poland, EU
Influence of the Smoothing Conditions in Vibro-abrasive Finishing and Deburring Process for Geometric Structure of the Surface Machine Parts made of Aluminium Alloys EN AW-2017A - POSTER
Co-authors: SPADŁO Sławomir
PD3
BROŽEK Vlastimil
University of Chemistry and Technology Prague, Prague, Czech Republic, EU
Boronized Stainless Steels with Zirconia Coatings - POSTER
Co-authors: KOLÍSKO Jiří, KUBATÍK Tomáš František, MASTNÝ Libor, POKORNÝ Petr
PD4
BUCKI Tomasz
The University of Technology in Kielce, Kielce, Poland, EU
High Temperature Oxidation Behaviour of Aluminized Coatings on Grey Cast Iron fabricated by Hot-dipping in a Pure Al or AlSi11 Bath - POSTER
Co-authors: MOLA Renata, BĄK Angelika
PD5
ČESÁNEK Zdeněk
Research and Testing Institute Pilsen Ltd., Pilsen, Czech Republic, EU
High Temperature Hot Corrosion Behavior of Selected Thermally Sprayed Coatings on X22 Stainless Steel in an Aggressive Environment at 750 °C - POSTER
Co-authors: SCHUBERT Jan, HOUDKOVÁ Šárka, PRANTNEROVÁ Michaela
PD6
DEPCZYŃSKI Wojciech
Kielce University of Technology, Kielce, Poland, EU
The Selected Properties of Porous Layers formed by Pulse Microwelding Technique - POSTER
Co-authors: MŁYNARCZYK Piotr, SPADŁO Sławomir, ZIACH Ewelina, HEPNER Piotr
PD7
DOBROCKÝ David
University of Defense, Brno, Czech Republic, EU
The Influence of the Nitrided Layer Depth in the Root of V-notch to Notch Toughness of 30CRMOV9 Steel - POSTER
Co-authors: KUSMIČ David
PD8
DUDEK Agata
Czestochowa Univeristy of Technology, Częstochowa, Poland, EU
Microstructure and Properties Surface Remelted PM Stainless Steel - POSTER
Co-authors: WROŃSKA Agata, NAPADŁEK Wojciech
PD10
GAVENDOVÁ Petra
Brno University of Technology, Institute of Materials Science and Engineering, NETME centre, Brno, Czech Republic, EU
Comparison of CoNiCrAlY Coatings produced by HVOF and CGDS-spraying Technique - POSTER
Co-authors: ČÍŽEK Jan, DLOUHÝ Ivo, ČUPERA Jan, HANUSOVÁ Petra
PD11
GONDEK Ján
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU
Development of Microstructure and Phase Composition of Zn-Al-Mg Alloy with Various Amount of Sn - POSTER
PD12
KIRSCHNER Vít
VUTS, a.s., Liberec, Czech Republic, EU
The Effect of the Laser Spots Overlap on the Structure during Square Parts Quenching of 1.1191 Steel - POSTER
Co-authors: ŠVEC Martin, BRUTHANSOVÁ Romana, DVOŘÁK Libor
PD13
KOLNEROVÁ Michaela
Technical University of Liberec, Liberec, Czech Republic, EU
Sheets with Surface Coating of Zn/Mg/Al for Adhesive Bonding Application in the Automotive Industry - Comparison of Producers - POSTER
Co-authors: SOBOTKA Jiří, SOLFRONK Pavel, ZUZÁNEK Lukáš
PD14
LEVENT Elen
Karabuk University, Karabuk, Turkey
Effects of Bismuth (Bi) Additions on Microstructure and Mechanical Properties of AZ91 Alloy - POSTER
Co-authors: ZENGIN Huseyin, TURAN Muhammet Emre, SUN Yavuz, AHLATCI Hayrettin, TUREN Yunus
PD15
MACIEJ Artur
Silesian University of Technology, Gliwice, Poland, EU
Formation of Oxide Conversion Coatings on Galvanic Zn-Ni Alloy in Saturated Ca(OH)2 Solution - POSTER
Co-authors: MICHALSKA Joanna, DERCZ Grzegorz, SOCHA Robert, GOREWODA Tadeusz, SIMKA Wojciech
PD16
MÁLEK Václav
Technical University of Liberec, Liberec, Czech Republic, EU
Comparing Tribological Properties, Coefficient of Friction and Adhesion Thin Layers - POSTER
Co-authors: BAKALOVÁ Totka, VOLESKÝ Lukáš
PD17
NOVÁKOVÁ Radka
University of Chemistry and Technology, Prague, Czech Republic, EU
Relation of Corrosion Stimulators Transport and Modern Concrete Pore Microstructure
Co-authors: KOUŘIL Milan, STOULIL Jan, SPLÍTEK Karel, ŠPINAR Vojtěch, DOBIÁŠ Daniel, POKORNÝ Petr
PD18
PAPADATU Carmen-Penelopi
"Dunarea de jos" University, Galati, Romania, EU
Experimental Researches Regarding the Possibility to Increase the Durability of a CrMo alloyed Steel subjected to some Non-Conventional Treatments applied in Magnetic Field - POSTER
Co-authors: COTEȚ Adrian, VASILESCU Elisabeta, ANDREI Gabriel
PD19
PASIECZYNSKI Lukasz
Firma Handlowa BARWA Jaroslaw Czajkowski, Kielce, Poland, EU
Anticorrosion Coatings Systems for Railway Industry Corrosion Protection - POSTER
Co-authors: RADEK Norbert, RADZISZEWSKA-WOLINSKA Jolanta
PD20
PÉREZ-LABRA Miguel
Autonomous University of Hidalgo State - UAEH, Pachuca Hidalgo Mexico, Mexico
Silver Cementation with Zinc from Residual X-ray fixer, Experimental and Thermochemical Study - POSTER
Co-authors: REYEZ-PEREZ Martín, ROMERO-SERRANO José A., ÁVILA-DÁVILA Erika O., BARRIENTOS-HERNÁNDEZ Francisco R., PANDIYAN Thangarasu, REYEZ Ivan A.
PD21
PETRŮ Jana
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Wear Progress of Exchangeable Cutting Edge Inserts During Ti6Al4V Alloy Machining - POSTER
Co-authors: SCHIFNER Jan, ZLÁMAL Tomáš, ČEP Robert, KRATOCHVÍL Jiří, STANČEKOVÁ Danka
PD22
RADEK Norbert
Kielce University of Technology , Kielce, Poland, EU
Microstructure of Electro-spark Coatings for Sliding Friction Pairs - POSTER
Co-authors: ANTOSZEWSKI Krzysztof, DUDEK Agata
PD23
ŠAJGALÍK Michal
University of Zilina, Zilina, Slovakia, EU
Implementation of Coating for Failure Elimination of Dial Gauges - POSTER
Co-authors: STANCEKOVA Dana, PETRU Jana, BALAZ Pavol
PD24
SMAZALOVÁ Eva
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
Comparative Study of Fretting Behaviours of HVOF-sprayed Coatings at Room and High Temperature - POSTER
Co-authors: HOUDKOVÁ Šárka
PD25
ŠVEC Pavel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Evaluation of Surface Quality Metallurgical Materials - POSTER
Co-authors: ŠŤASTNÝ Vladislav, DAVID Jiří, GARZINOVÁ Romana
PD26
SZABÓ Juraj
Institute of Materials Research of the SAS, Kosice, Slovakia, EU
Thermal Structure Stability of Cu-MgO Nanocomposites - POSTER
PD27
VICTOROVICH Sergey
East Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan
The Structure and Properties of the Nanocomposite Films Nb-Al-N - POSTER
Co-authors: TLEUKENOV Yer-Targyn
PD28
VONTOROVÁ Jiřina
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Magnetic-inductive Measurement of the Zinc Layer on the Non-alloy Steel Sheet - POSTER
Co-authors: MOHYLA Petr, HAVELKA Lukáš
PD29
ZUZÁNEK Lukáš
Technical University of Liberec, Liberec, Czech Republic, EU
Analysis of Zn-Mg Coating in Dependence on the Extend of Deformation by different Temperatures - POSTER
Co-authors: ŘIDKÝ Ondřej, SOLFRONK Pavel, KOLNEROVÁ Michaela, SOBOTKA Jiří

Poster session E

Chairmen:
Prof. Ing. Miroslav KURSA, CSc.
Prof. Ing. Jaromir DRAPALA, CSc.
Prof. Dr. Ing. Dalibor VOJTECH

PE2
AMRANE Chahira
University of Constantine 1, Constantine, Algeria
The Ageing Effect on Beta Phase Precipitation in Al-12wt.%Mg Alloy - POSTER
PE3
ANIK Mustafa
Eskisehir Osmangazi University, Eskişehir, Turkey
Molten Salt Synthesis of La-Ni-Co Hydrogen Storage Alloys - POSTER
Co-authors: ALANUR Binal Aybar, NURTEN Başak Hatirnaz, DUYGU Özdemir
PE4
BALART Maria
Brunel University London, London, United Kingdom, EU
Effects of casting temperature and microalloying elements on the grain structure of DHP copper - POSTER
PE5
BĚLKOVÁ Monika
Technical University of Liberec, Liberec, Czech Republic, EU
The Material Characteristic and the Deformation Development by Magnesium Plates in the Area of its Critical State - POSTER
Co-authors: SOLFRONK Pavel
PE6
BLANCHER B. Simon
ERAMET, Paris, France, EU
Follow-up and Mineralogical Characterization of Freeze Lining Evolution: a Record of Furnace Life - POSTER
Co-authors: CRESPO Eloy, XAYASEHN Arunvady
PE7
BOROWIECKA-JAMROZEK Joanna
Kielce University of Technology, Kielce, Poland, EU
The Microstructure and Properties of Hot Pressed Iron Bronze Powders - POSTER
PE8
BOUDJAADAR Mohamed
University Constantine, Sciences Faculty, Research Unit of Materials Science and Applications, Constantine, Algeria
Contribution to the Study of Precipitation Kinetics in the Al-Zn-Mg-(Cu) System Alloys by Differential Scanning Calorimetric (DSC) and Microhardness Measurements - POSTER
Co-authors: HADJADJ Lakhdar, BOUMAZA Liela
PE9
BOUTASSOUNA Djamal
University of Laghouat, Laghouat, Algeria
Physico-chemical Behavior in Co-segregation of Impurities at the Surface of Polycrystalline Copper - POSTER
Co-authors: SERGEEV Igor, MAKAEVA Louise Murshadievna, LEFKAIER Ibn Khaldoun
PE10
BRYKSÍ STUNOVÁ Barbora
Czech Technical University in Prague, Prague, Czech Republic, EU
The Study of the Properties of Al Alloy Castings Produced by Rheocasting - POSTER
Co-authors: BRYKSÍ Vlastimil, PUCHNIN Maxim
PE11
ČEGAN Tomáš
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Effect of Ageing on Microstructure and Microhardness of Fully Lamellar Ti-45Al-5Nb-0.2B-0.75C Alloy - POSTER
Co-authors: LAPIN Juraj, SZURMAN Ivo, NOSKO Martin
PE12
ČECH Jaroslav
Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Prague, Czech Republic, EU
Structural and Mechanical Characterization of Spark Plasma Sintered Tungsten - POSTER
Co-authors: HAUŠILD Petr, KOCMANOVÁ Lenka, MATĚJÍČEK Jiří
PE13
ČERMÁK Jiří
Institute of Physics of Materials of the AS CR, v.v.i., Brno, Czech Republic, EU
Hydrogen Storage in Two Chosen Mg-In-C Alloys: Effect of Composition and Ageing - POSTER
Co-authors: KRÁL Lubomír
PE14
CHERNIKOV Evgenii
St.Petersburg State Polytechnical University, St.Petersburg, Russian Federation
Numerical Simulation and Microstructure Analysis of Friction Stir Welded Al 6082 - POSTER
Co-authors: NAUMOV Anton, MICHAILOV Vesselin, GOLUBEV Iurii
PE15
ĎURIŠIN Juraj
Institute of Materials Research of the SAS, Kosice, Slovakia, EU
Thermal Stability of Nanostructure of Dispersion Strengthened Copper Alloys - POSTER
Co-authors: ĎURIŠINOVÁ Katarína, OROLÍNOVÁ Mária
PE16
EIRIYAKUL Tawanrat
Plusmax Automation Co., Ltd., Bangkok, Thailand
Effect of Various Temperature Dropping Conditions during Solution Treatment in Refurbishment Heat Treatment on Final Microstructures of Cast Nickel Base Superalloy, Grade Inconel 738 - POSTER
Co-authors: PROMBOPHA Aimamorn, EIRIYAKUL Tawanrat, POLSILAPA Sureerat, WANGYAO Panyawat
PE17
GOLUBEV Iurii
St.Petersburg State Polytechnical University, St.Petersburg, Russian Federation
Research of Temperature Distribution during Friction Stir Welding of 2 mm AW 6082 Sheets - POSTER
Co-authors: NAUMOV Anton, CHERNIKOV Evgenii, MICHAILOV Vesselin
PE18
GUZEJ Michal
Brno University of Technology, Faculty of Mechanical Engineering, Heat Transfer and Fluid Flow Laboratory, Brno, Czech Republic, EU
Water Jet Cooling of Aluminium Alloy - POSTER
Co-authors: BARTULI Erik, KRIŠTOF Ondřej
PE19
HANUSOVÁ Petra
Brno University of Technology, Brno, Czech Republic, EU
Preparation of Al2O3 – Nb3Al Nanocomposite Powder by Mechano-chemical Reaction during Mechanical Alloying - POSTER
Co-authors: DLOUHÝ Ivo
PE20
HLINKA Josef
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Corrosion Properties of Porous Titanium Sintered with Sodium Chloride Particles - POSTER
Co-authors: LASEK Stanislav, KVÍČALA Miroslav
PE21
HLOSTA Jakub
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Study of Structural and Mechanical-physical Properties of Metal Powder - POSTER
Co-authors: JEZERSKÁ Lucie, ZEGZULKA Jiří, LIPTÁKOVÁ Tatiana, NEČAS Jan
PE22
HWANG Seung J.
Daejin University, Seoul, Korea, Republic of
Chracterization of Al2O3 Dispersed Ferrite produced by Controlled Milling - POSTER
PE23
ISUPOV Fedor
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russian Federation
Numerical Simulation of Sheet Profiling Process from Aluminum Alloy - POSTER
Co-authors: GANIN Sergey V., KODZHASPIROV George E., MICHAILOV Vesselin, TSMENKO Valeriy N.
PE24
JAN Vít
Brno University of Technology, Brno, Czech Republic, EU
Heat Treatment of Hypo-eutectoid NITI Alloy manufactured by CGDS Powder Mix Deposition - POSTER
Co-authors: DYČKA Martin, ČUPERA Jan, ČÍŽEK Jan
PE25
JUŘICA Jan
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Refinement of Microstructure of Several Gama-TiAl Alloys by Massive Transformation and Effect of Refinement on Compression Properties - POSTER
Co-authors: SKOTNICOVA Kateřina, PETLÁK Daniel
PE26
KATZ Valery
SCE Shamoon College of Engineering, Beer Sheva, Israel
Fractal Interpretation of Ultrasonic Crystallization of Solutions - POSTER
PE27
KEJZLAR Pavel
Technical University of Liberec, Liberec, Czech Republic, EU
High-temperature Properties of Fe3Al with Addition of 2 at. % of Zr - POSTER
Co-authors: ŠVEC Martin
PE28
KEKULE Tomáš
Charles University in Prague, Faculty of Mathematics and Physics, Prague, Czech Republic, EU
Phase Transformations and Microstructure Development during Heat Treatment of Mg-Y-Nd-(Mn)-Zn Alloys - POSTER
Co-authors: VLACH Martin, KUDRNOVÁ Hana, KODETOVÁ Veronika, SMOLA Bohumil, STULÍKOVÁ Ivana
PE29
KIM Bong-H.
Korea Institute of Industrial Technology, Yonsei University, Incheon, Korea, Republic of
High-temperature Compression Behavior and Microstructural Evolution of Al-5Mg-0.05, 0.1Al2Ca Alloys - POSTER
Co-authors: YOON Young-O., KIM Shae-K.
PE30
KIM Bong-H.
Korea Institute of Industrial Technology, Yonsei University, Incheon, Korea, Republic of
Rolling Characteristics and Mechanical Properties of Al2Ca-contained 5052 and 5083 Alloys - POSTER
Co-authors: YOON Young-O., KIM Shae-K.
PE31
KIM Bong-H.
Korea Institute of Industrial Technology, Yonsei University, Incheon, Korea, Republic of
Tensile Properties of As-rolled Al-7.5Mg Alloys Fabricated by Combined Process of Extrusion and Cold-rolling - POSTER
Co-authors: YOON Young-O., KIM Shae-K.
PE32
KIM Jung Seok
Korea Railroad Research Institute, Uiwang, Korea, Republic of
Welding Strength Evaluation of AZ61 Magnesium Alloy Extruded Sandwich Structures - POSTER
Co-authors: LIM Jae Yong, LEE Woo Geun, SUN Seung Ju
PE33
KIREEV Andrei
Vladimir State University (VlSU), Vladimir, Russian Federation
Decreasing the Influence of Contaminants on Aluminum Anodic Materials Electrochemical Properties - POSTER
Co-authors: KECHIN Vladimir
PE34
KITA Paweł
AGH University of Science and Technology , Cracow, Poland, EU
Influence of Metallic Allowance on Static and Dynamic Properties of Epoxy Laminates - POSTER
Co-authors: ŻABA Krzysztof, POCIECHA Daniel
PE35
KLIMECKA-TATAR Dorota
Czestochowa University of Technology, Czestochowa, Poland, EU
Microscopic Observations under the Effect of Surface Preparation Parameters of Ni-Cr-Mo Alloy in Metal-ceramic Connection Stability Terms - POSTER
PE36
KODETOVÁ Veronika
Charles University in Prague, Faculty of Mathematics and Physics, Prague, Czech Republic, EU
Properties of Squeeze-cast MgZnAl and MgZnAlCa Alloys with Icosahedral Phase during Annealing with Constant Heating Rates - POSTER
Co-authors: VLACH Martin, STULÍKOVÁ Ivana, SMOLA Bohumil, KEKULE Tomáš
PE37
KOLCHUGINA Natalia
Baikov Institute of Metallurgy and Materials Science of the RAS, Moscow, Russian Federation
Effect of Low-Temperature Annealing on the Structure and Hysteretic Properties of Nd-Fe-B Magnets Prepared with Hydride-Containing Powder Mixtures - POSTER
Co-authors: BURKHANOV Gennady, LUKIN Aleksandr, KOSHKID’KO Yurii, DORMIDONTOV Andrei, SKOTNICOVÁ Katerina, ŽIVOTSKY O., ČEGAN T., SITNOV Vladimir
PE38
KONIECZNY Marek
Kielce University of Technology, Kielce, Poland, EU
Diffusion Bonding and Transient Liquide Phase joining of Titanium to AISI 304 Stainless Steel with an Aluminum Interlayer - POSTER
Co-authors: SZWED Bartłomiej, MOLA Renata
PE39
KORFANTY Katarzyna
AGH University of Science and Technology, Cracow, Poland, EU
Analysis of Process Data for the Purpose of the Expert Supervision System of Heat Treatment Processes of Titanium Alloys - POSTER
Co-authors: ZABA Krzysztof, NOWAK Stanislaw, GLODZIK Marcin
PE40
KOSHKID’KO Yurii S.
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Optimization Heat Treatment of Nd-Fe-B-based Alloys for the Preparation of High Coercivity Permanent Magnets - POSTER
Co-authors: SKOTNICOVÁ Kateřina, ČEGAN Tomáš, KURSA Miroslav, JUŘICA Jan, KOLCHUGINA Natalia B., ŽIVOTSKÝ Ondřej
PE41
KOZAKIEWICZ Łukasz
Silesian University of Technology , Gliwice, Poland, EU
Heat Flow Kinetics in the Moulding Sand - POSTER
Co-authors: CHOLEWA Mirosław
PE42
KRAMÁR Tomáš
Czech Technical University in Prague, Faculty of Mechanical Engineering, Prague, Czech Republic, EU
Disc Laser Welding of Mg alloy AZ61A - POSTER
Co-authors: VONDROUŠ Petr, KOLAŘÍK Ladislav, SAHUL Miroslav
PE43
KRAUS Martin
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Analysis of the Damage of Functional based on the Cobalt - Resistant Abrasion Layers - POSTER
Co-authors: BYSTRIANSKÝ Jaroslav
PE44
KROUPOVÁ Ivana
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Casting Methods of Production of Metallic Foam with Irregular Inner Structure - POSTER
Co-authors: RADKOVSKÝ Filip, LICHÝ Petr, BEDNÁŘOVÁ Vlasta
PE45
KUČEROVÁ Ludmila
University of West Bohemia in Pilsen, Pilsen, Czech Republic, EU
The Hazards of Defects and Poor Quality of Al Materials - POSTER
Co-authors: FORMÁNEK Josef, TOCHYLIN Mykhailo
PE46
LASEK Stanislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Some Corrosion Electrochemical Properties of the Nd-Fe-B Type Magnetic Material - POSTER
Co-authors: SKOTNICOVÁ Kateřina, BYRTUS Marek, HLINKA Josef
PE47
LAZAR (VINATU) Ramona-Mihaela
Politehnica University of Timisoara, Timisoara, Romania, EU
Process Parameters of the Welding with Stored Energy in Capacitors of Ni-based Amorphous Ribbons - POSTER
Co-authors: CODREAN Cosmin, BURCA Mircea, MITELEA Ion, SERBAN Viorel-Aurel
PE48
LEE Woo Geun
University of Science & Technology, Uiwang, Korea, Republic of
Effect of Welding Condition on Mechanical Properties of FSW AZ61 Magnesium Alloy - POSTER
Co-authors: KIM Jung Seok, LIM Jae Yong, SUN Seung Ju
PE49
LICHÝ Petr
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Cooling Effect of Casting Moulds and its Effect on Microstructure of Aluminum Alloys - POSTER
Co-authors: BEŇO Jaroslav, KROUPOVÁ Ivana, RADKOVSKÝ Filip
PE50
MADAJ Michal
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Study of Properties NiTi Alloy after Electrone Beam Zone Melting - POSTER
Co-authors: SZURMAN Ivo, DRÁPALA Jaromír
PE51
MALCHARCZIKOVÁ Jitka
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Structural Characteristik of Ni-Al-Mo based Alloys - POSTER
Co-authors: KURSA Miroslav, POHLUDKA Martin, KOHUT Pavel
PE52
MOLA Renata
Kielce University of Technology, Kielce, Poland, EU
The Microstructure of Mg modified by Surface Alloying with an AlMg4.5Mn Wire - POSTER
Co-authors: BUCKI Tomasz, DZIADOŃ Andrzej
PE53
MORAVČÍK Igor
Brno University of Technology, Faculty of Mechanical Engineering, Institute of Materials Science and Engineering - NETME centre, Brno, Czech Republic, EU
Multicomponent Alloy Powders Preparation by Mechanical Alloying - POSTER
Co-authors: ČÍŽEK Jan, DLOUHÝ Ivo
PE54
NEUMANN Heinz
Technical University of Liberec, Liberec, Czech Republic, EU
Influence of Cooling Mode on the Electrode Caps from Alloy Cu-Cr-Zr Operating Life at Resistance Spot Welding - POSTER
Co-authors: SOBOTKA Jiří
PE55
NOGA Piotr
AGH University of Science and Technology, Cracow, Poland, EU
The Influence of Extrusion Ratio on the Strength of Hot Extruded Aluminium Alloy Chips - POSTER
Co-authors: WZOREK Łukasz, WIEWIORA Jakub
PE56
ONANKO Anatoliy Petrovich
Kyiv National University, Physical department, Kyiv, Ukraine
Mechanical Properties of Ti Alloys and Automated System of Anisotropy Visualization - POSTER
Co-authors: PRODAYVODA G.T., ONANKO Y.A., SHABATURA A.V., ONANKO G.G., ONISCHENKO A.N.
PE57
OSTAPOVETS Andriy
Institite of Physics of Materials of the AS CR, v.v.i., Brno, Czech Republic, EU
Atomistic Simulations of Twin Boundaries Faceting in HCP Materials - POSTER
PE58
PÁLENÍKOVÁ Lucie
Brno University of Technology, Brno, Czech Republic, EU
Phase and Thermal Analysis of Microstructure Evolution of Bi – Metallic Materials during Heat Treatment - POSTER
Co-authors: ČUPERA Jan, ČÍŽEK Jan, JAN Vít
PE59
POHLUDKA Martin
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Effect of Preparation Methods on a Microstructure of the Ni3Al-based Alloys alloyed by Molybdenum - POSTER
Co-authors: MALCHARCZIKOVA Jitka, PETLAK Daniel
PE60
RADKOVSKÝ Filip
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Use of Metal Foams as an Active Element in the Deformation Zones - POSTER
Co-authors: GEBAUER Marek, KROUPOVÁ Ivana, LICHÝ Petr
PE61
SAJDAK Wojciech
AGH University of Science and Technology, Cracow, Poland, EU
The Capability of Hardening of a Rapidly Crystalized alloy 6061 - POSTER
PE62
SATERNUS Mariola
Silesian Univeristy of Technology, Gliwice, Poland, EU
Production of Platinum from Primary and Secondary Materials – a Review - POSTER
Co-authors: FORNALCZYK Agnieszka, WILLNER Joanna
PE63
SHAMSHURIN Alexey
Peter the Great St.Petersburg Polytechnic University, Saint-Petersburg, Russian Federation
EBSD Study of Deformation Processes in Ni-based Heat-resistant Monocrystalline Alloys - POSTER
Co-authors: FILIPPOV Sergei, KONONOV Alexander
PE64
SKRZEKUT Tomasz
AGH University of Science and Technology, Cracow, Poland, EU
Effect of Annealing Temperature on the Structure of Mechanically Alloyed Al-AgO Composite - POSTER
Co-authors: KULA Anna, BLAZ Ludwik, SUGAMATA Makoto
PE65
ŚLEBODA Tomasz
AGH University of Science and Technology, Cracow, Poland, EU
The Effect of Thermomechanical Parameters on Deformation Behavior of P/M Iron Aluminide Alloy - POSTER
Co-authors: WOJTASZEK Marek
PE66
ŠPOTÁK Martin
Slovak University of Technology, Faculty of Materials Science and Technology, Trnava, Slovakia, EU
Corrosion of Candidate Lead-free Solder Alloys in Saline Solution - POSTER
Co-authors: DRIENOVSKÝ Marián, MIŠÍK Jozef, RÍZEKOVÁ TRNKOVÁ Lýdia, PALCUT Marián
PE67
ŠVEC Martin
Technical University of Liberec, Liberec, Czech Republic, EU
The CTE of Fe3Al and FeAl-type iron aluminides - POSTER
Co-authors: MACAJOVÁ Eva
PE68
SZWED Bartłomiej
Kielce University of Technology, Kielce, Poland, EU
Characterization of Transient Liquid-phase Bonding between Titanium and Stainless Steel using Nickel Interlayer - POSTER
Co-authors: KONIECZNY Marek, MOLA Renata
PE69
TSEMENKO Valeriy N.
St.Petersburg State Polytechnical University, St.Petersburg, Russian Federation
Technology Develpopment for Al-Rare Earth Metals Composite Billets Production - POSTER
Co-authors: GANIN Sergey V., DOAN Van Phuc
PE70
VODICKOVA Vera
Technical University of Liberec, Liberec, Czech Republic, EU
The Effect of Al and C Contents Variations on the Phase Composition and Phase Morphology of Pyroferal© Type Iron Aluminides - POSTER
Co-authors: HANUS Pavel, KEJZLAR Pavel
PE71
WIEWIORA Jakub
AGH University of Science and Technology, Cracow, Poland, EU
Surface Quality of Profiles extruded from Various Forms of Aluminium Alloys Scrap - POSTER
Co-authors: SKRZEKUT Tomasz, NOGA Piotr
PE72
WIEWIÓRA Marcel
AGH University of Science and Technology, Cracow, Poland, EU
Mechanical Properties of Solid State Recycled 6060 Aluminium Alloy Chips - POSTER
Co-authors: WEDRYCHOWICZ Mateusz, WZOREK Lukasz
PE73
WYSLOCKA Elzbieta
Czestochowa University of Technology, Czestochowa, Poland, EU
Magnets: History, the Current State and the Future - POSTER
Co-authors: ULEWICZ Robert
PE74
YESKERMESSOV D.K.
D. Serikbayev East Kazakhstan State Technical University, Ust-Kamenogorsk, Kazakhstan
Researching of High Entropy (Ti-Zr-Nb)N Coatings’ Physical and Mechanical Properties obtained by Vacuum-arc Deposition Method - POSTER
Co-authors: PLOTNIKOV S.V., POGREBNJAK A.D., YERDYBAEVA N.K., TLEUKENOV E.O.
PE75
ZÝKA Jiří
UJP PRAHA a.s., Prague, Czech Republic, EU
Structure and Mechanical Properties of TaNbHfZrTi High Entropy Alloy - POSTER
Co-authors: ANDRŠOVÁ Irena, PODHORNÁ Božena

Poster session F

Chairmen:
Prof. Ing. Radim LENORT, Ph.D.
Assoc. Prof. Dorota BURCHART-KOROL, Ph.D.
Prof. Ing. Darja NOSKIEVICOVA, CSc.
Assoc. Prof. Ing. Iveta VOZNAKOVA, Ph.D.

PF1
BALON Petr
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Application of SMED Methodology in Deep Drawn Stamping - POSTER
Co-authors: BUCHTOVÁ Jana
PF2
BARAN Joanna
Warsaw University of Life Sciences, Warsaw, Poland, EU
Productivity and Efficiency of US Metal Industry in 2006-2014 - POSTER
Co-authors: ROKICKI TOMASZ
PF3
BARAN Jolanta
Silesian University of Technology, Zabrze, Poland, EU
Conditions of using Steel Products for the Production of Steam Turbine Blades – Ecodesign Implications - POSTER
PF4
BESTA Petr
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Impact of Zinc Compounds on Blast Furnace Lining Life - POSTER
Co-authors: SIKOROVÁ Andrea, JANOVSKÁ Kamila, KUBICA Stanislav, VILAMOVÁ Šárka
PF5
BRANSKÁ Lenka
University of Pardubice, Pardubice, Czech Republic, EU
The Influence of Specific Forms of Cooperation in Supply Chain on Inventory - POSTER
Co-authors: PECINOVÁ Zuzana, VAVRA Jan
PF6
BROŽOVÁ Silvie
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Economic Assessment of Secondary Materials Generated in Metallurgical Companies - POSTER
Co-authors: INGALDI M., PUSTĚJOVSKÁ P., JURSOVÁ S.
PF7
BRZÓSKA Jan
Silesian University of Technology , Gliwice , Poland, EU
BSC – Basic Assessment of the Business Model Effectiveness of the Selected Metallurgical Companies - POSTER
PF8
CZAJKOWSKA Agnieszka
Kielce University of Technology, Kielce, Poland, EU
Identification and Analysis of Non-conformities in Production of Construction Materials with the Example of Hot-rolled Sheet Metal - POSTER
PF9
CZAJKOWSKA Agnieszka
Kielce University of Technology, Kielce, Poland, EU
Use of OEE Coefficient for Identification of Bottlenecks for Pressure Die Casting Processes - POSTER
PF10
DLUGOŠ Ivan
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Effects of Psychosocial Factors in the Work Environment on Business Performance within the Metallurgical Industry - POSTER
Co-authors: VOZŇÁKOVÁ Iveta, SAMOLEJOVÁ Andrea
PF11
DLUHOŠOVÁ Dana
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Financial Performance Variance Analysis of Non-linear Decomposition in Metallurgy - POSTER
Co-authors: PTÁČKOVÁ Barbora, ZMEŠKAL Zdeněk
PF12
DOHN Katarzyna
Silesian University of Technology, Gliwice, Poland, EU
Supply Processes in a Machine-building Enterprise Concerning Metallurgical Products - Case Study - POSTER
Co-authors: GUMIŃSKI Adam, PAWLUŚ Artur
PF13
DZIUBA Szymon T.
Wroclaw University of Economics, Wroclaw, Poland, EU
Modernity Evaluation of the Machines used during Production Process of Metal Products - POSTER
Co-authors: INGALDI Manuela, DZIUBA Szymon T.
PF14
FOLTA Martin
SKODA AUTO University, Mlada Boleslav, Czech Republic, EU
Production Part Approval Process in the Metallurgical Sector for Automotive Industry - POSTER
PF15
FRISCHER Robert
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Modern Localization Apparatus in Metallurgical Enterprise - POSTER
Co-authors: POLLAK Miloš, TUHÝ Tomáš, PRAŽÁKOVÁ Veronika
PF16
GOŁASA Piotr
Warsaw University of Life Sciences, Warsaw, Poland, EU
Energy Consumption in the Iron & Steel Industry in EU Member States in Light of the Theory of Environmental Economics - POSTER
Co-authors: WYSOKIŃSKI Marcin, BIEŃKOWSKA-GOŁASA Wioletta
PF17
GRABOWSKA Sandra
Silesian University of Technology, Gliwice, Poland, EU
Business Model of Steel Company - Focus on the Innovation - POSTER
Co-authors: FURMAN Joanna
PF18
HALFAROVÁ Petra
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Evaluation of Numerical Characteristics of True Interlamellar Spacing in Perlite after Cold Wire Drawing of Eutectoid Steel - POSTER
Co-authors: FABÍK Richard, VÁŇOVÁ Petra
PF19
HOLMAN David
SKODA AUTO University, Mladá Boleslav, Czech Republic, EU
Understanding of the Lean Productivity - the Source of SCM Productivity Growth in the Metallurgical Industry - POSTER
Co-authors: JIRSÁK Petr, LENORT Radim, STAS David, WICHER Pavel
PF20
HOŘÍNKOVÁ Barbora
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Possibilities of Product Quality Planning Improvement using Selected Tools of Design for Six Sigma - POSTER
Co-authors: PLURA Jiří
PF21
JANIK Agnieszka
Silesian University of Technology, Zabrze, Poland, EU
Evaluation of Environmental Life Cycle Cost of Steel Production - Case Study - POSTER
PF22
JANOVSKÁ Kamila
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Structural Analysis used as a Tool to Improve the Analytical and Informative Functions of Controlling in a Metallurgical Enterprise - POSTER
Co-authors: BESTA Petr, VILAMOVÁ Šárka, STOCH Milan, ŠVECOVÁ Eva, HRUBÁ-HENZLOVÁ Anna, MARTINKOVÁ Petra
PF23
JIRSÁK Petr
University of Economics, Prague, Czech Republic, EU
Application of Simulation in Metallurgy Supply Chain Optimization - POSTER
Co-authors: HOLMAN David, KRŠŇÁKOVÁ Lenka, JANČÍK Jakub
PF24
JURSOVÁ Simona
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Porosity of Metallurgical Sinter as an Indicator of Iron Ore Reducibility - POSTER
Co-authors: PUSTĚJOVSKÁ Pavlína, BROŽOVÁ Silvie
PF25
KARDAS Edyta
Czestochowa University of Technology, Czestochowa, Poland, EU
The Analysis of Non-conformances of Metal Impeller using Selected Quality Instruments - POSTER
PF26
KLAPUT Pavel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Evaluation of Quality of the Visual Inspection of Aluminum Components Assembly According to Different Methods - POSTER
Co-authors: MACEK Radim, PLURA Jiří
PF27
KLUSKA-NAWARECKA Stanisława
The Foundry Research Institute (FRI), Cracow, Poland, EU
Integration of Technological Data using Ontologies in the Innocast Database mapping into Knowledge Base CastNode - POSTER
Co-authors: WILK-KOLODZIEJCZYK Dorota, REGULSKI Krzysztof
PF28
KONSTANCIAK Anna
Czestochowa University of Technology, Czestochowa, Poland, EU
Evaluation of the Quality of Coke for Blast Furnace Process in Chosen Metallurgical Plant - POSTER
PF29
KUBICA Stanislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Presence of Harmful Elements in Blast Furnace Process and the Potential Methods of their Removal - POSTER
Co-authors: KUTÁČ Josef, LAMPA Martin, BESTA Petr
PF30
KUBICA Stanislav
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Principles of Lean Manufacturing in Metallurgical Processes - POSTER
Co-authors: BESTA Petr, SIKOROVÁ Andrea, MYNÁŘ Martin
PF31
KUTÁČ Josef
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Costing as a Tool of Labour Consumption Management of Metallurgical Production - POSTER
Co-authors: BESTA Petr, LAMPA Martin
PF32
LAMPA Martin
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Utility Theory Use in Managerial Decision in Metallurgical Company - POSTER
Co-authors: SIKOROVÁ Andrea, KUTÁČ Josef
PF33
NEPRAŠ Karel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Possibilities of Data Non Normality Solving at Process Capability Analysis in Terms of Part Symmetry - POSTER
Co-authors: PLURA Jiří
PF34
NOVOTNA Petra
University of Economics, Prague, Czech Republic, EU
Lean Supply Chains in Engineering, Metallurgy and key principles of their management - POSTER
Co-authors: VINS Marek
PF35
NOWAKOWSKA-GRUNT Joanna
Czestochowa University of Technology, Faculty of Management, Częstochowa, Poland, EU
Safety Management in Logistics Processes of Metallurgical Industry - POSTER
Co-authors: MAZUR Magdalena
PF36
PECINOVÁ Zuzana
University of Pardubice, Pardubice, Czech Republic, EU
Economic Implications of Providing Order Driven Production with Metallurgical Materials - POSTER
Co-authors: VAVRA Jan, BRANSKA Lenka
PF37
PLUNDER Karel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Revenues as a Significant Generator of Value in Metallurgical Enterprise - POSTER
Co-authors: JURICOVÁ Anna, WALA Aleksander
PF38
PUSTĚJOVSKÁ Pavlína
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Assessment of Technical-economical Development Perspective of Selected Non-ferrous metal potential in metallurgy - POSTER
Co-authors: BROŽOVÁ S., JURSOVÁ S., KARDAS E.
PF39
ROKICKI Tomasz
Warsaw University of Life Sciences, Warsaw, Poland, EU
Situation of the Steel Industry in Poland - POSTER
Co-authors: BARAN Joanna
PF40
RYSZKO Adam
Silesian University of Technology, Gliwice, Poland, EU
Environmental Management Practices, Interorganizational Cooperation and Knowledge Sharing in the Steel and Metal Industry in Poland - POSTER
PF41
ŠAJDLEROVÁ Ivana
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Value Stream Management in the Practice - POSTER
Co-authors: GREGUŠOVÁ Markéta, SCHINDLEROVÁ Vladimíra
PF42
SAMOLEJOVÁ Andrea
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Approach of Czech Metallurgical Enterprises to Human Resource Planning - POSTER
Co-authors: LAMPA Martin, DLUGOŠ, Ivan
PF43
SANIUK Sebastian
University of Zielona Gora, Zielona Góra, Poland, EU
Key Performance Indicators in Assessment of Enterprises of Metallurgical Sector - POSTER
Co-authors: SANIUK Anna, CAGÁŇOVÁ Dagmar, KUŻDOWICZ Paweł
PF44
SIKOROVÁ Andrea
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Causes of Molding Defects from Injection Forms and their Elimination - POSTER
Co-authors: HEGER Milan, ŠPIČKA Ivo, ZIMNÝ Ondřej
PF45
SKOWRON-GRABOWSKA Beata
Czestochowa University of Technology, Czestochowa, Poland, EU
Production of Steel and Environmental Requirements - POSTER
Co-authors: LENORT Radim
PF46
STAŠ David
SKODA AUTO University, Mladá Boleslav, Czech Republic, EU
Demand Predictive Model for Small Metallurgical Companies - POSTER
Co-authors: LENORT Radim, SOBEK Jiří, CHVĚJA Stanislav, HOLMAN David, PASTOR Otto
PF47
SUŠKOVÁ Andrea
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
The Importance of the Balanced Scorecard Implementation as a Tool of the Economic Management of the Metallurgical Enterprise - POSTER
Co-authors: BUCHTOVÁ Jana
PF48
SVĚDÍK Jan
University of Pardubice, Pardubice, Czech Republic, EU
Mezzanine Capital in the Form of Participating and Subordinated Loans as a Source of Financing Metallurgical Enterprises - POSTER
Co-authors: TETŘEVOVÁ Liběna
PF49
SZMAL Arkadiusz
Silesian University of Technology, Zabrze, Poland, EU
Technical-economic Perspective of using Composite Alternative Fuels in Metallurgical Production - POSTER
Co-authors: JODKOWSKI Maciej
PF50
SZURMAN Ivo
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Preparation of Alloys based on Intermetallic Compounds by VIM with Centrifugal Casting - POSTER
Co-authors: ČEGAN Tomáš, KURSA Miroslav
PF51
VEVERKOVÁ Jarmila
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Turbine Wheel Casting Pouring Process Parameters Improvement - POSTER
Co-authors: DONOCIKOVÁ Eva, VOZŇÁKOVÁ Iveta
PF52
VLČKOVÁ Vladimíra
University of Pardubice, Pardubice, Czech Republic, EU
Ways of Cooperation within Suplly Chain in Metallurgy from the Point of View of Company Processing Steel Coils - POSTER
PF53
WICHER Pavel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Measurement of Metallurgical Supply Chain Resilience - Case Study - POSTER
Co-authors: LENORT Radim, ČECH Martin
PF54
WYSOKIŃSKI Marcin
Warsaw University of Life Sciences, Warsaw, Poland, EU
Efficiency of the Metal Production Sector in Poland compared to other Manufacturing Industries - POSTER
Co-authors: BARAN Joanna, GOŁASA Piotr
PF55
ZIMNÝ Ondřej
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Pedagogical Model Of Stepping Heating Furnace Used In Teaching Of Metallurgical Aggregates Control - POSTER
Co-authors: HEGER Milan, ŠPIČKA Ivo, JANČÍKOVÁ Zora, MECA Roman, SIKOROVÁ Andrea
PF56
ZUSKÁČ Martin
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Use Fuzzy Custering in the Production Scheduling Sequence Heats - POSTER
Co-authors: HOŘÍNOVÁ Lucie, DAVID Jiří

Publication of a paper on CD

ZV1
CRISTEA Lidia
Romanian University of Science and Arts ''Gh.Cristea'', Bucharest, Romania, EU
The Physical-chemical Treatment of the Aqueous Systems with the Cyanide Content
Co-authors: CRISTEA Enona
ZV2
HATAB Ali
University of Tripoli, Tripoli, Libyan Arab Jamahiriya
Application of Grey Relational Grade in Optimizing Tensile Properties of 6061 Aluminum Alloy
Co-authors: FALAHATI Ahmad, DANNIGER Anette
ZV3
HRYNIEWICZ Tadeusz
Koszalin University of Technology, Koszalin, Poland, EU
XPS Surface Characterization of AISI 316L (EN 1.1404) SS Electrochemically Polished in the Mixture of H3PO4, H2SO4 and HNO3 Acids
Co-authors: ROKOSZ Krzysztof
ZV4
ISLAS VÁZQUEZ Hernán
Universidad Autonoma del Estado Hidalgo, Mineral de la Reforma, Hidalgo, Mexico
Decomposition Nature in Alkaline Medium of a Thallium Jarosite
Co-authors: PATIÑO Francisco, ROCA Antonio, REYES Iván A., FLORES Mizraim U., PALACIOS Elia G., REYES Martín
ZV5
KUBIŃSKA-JABCOŃ Ewa
AGH University of Science and Technology, Cracow, Poland, EU
Analysis of the Economical, Ecological and Quality Advantages Consequent Resulting from Initiation of Technology Integrated in Metallurgy
Co-authors: NIEKURZAK M., KUBIŃSKI W.
ZV6
NIEKURZAK Mariusz
AGH University of Science and Technology, Cracow, Poland, EU
Use of Eddy Currents Effect in the Research over Tribological Properties of Strip Mill Rolls
Co-authors: KUBIŃSKI Wiktor, KUBIŃSKA-JABCOŃ Ewa
ZV7
REYES PÉREZ Martin
Autonomous University of Hidalgo State - UAEH, Mineral de la Reforma Hidalgo, Mexico
Surface Modification of Pyrite during Autogenous Grinding
Co-authors: PALACIOS G. Elia, PATIÑO C. Francisco, ESCUDERO G. Ramiro, FLORES G. Mizraim Uriel, REYES D. Iván A., MIRELES G. Ister
ZV8
TEIXEIRA Camila A.
Federal Institute of Bahia - IFBA, Salvador, Brazil
The Effect of Chromium on Microstructure of CuAlNi Shape Memory Alloy
Co-authors: COELHO Rodrigo E., NASCIMENTO Carina S., LIMA Pedro C., MENDONÇA Erick S., SANTOS Murilo S., COSTA Gabriel K. A.
ZV9
YONETKEN Ahmet
Afyon Kocatepe University, Afyonkarahisar, Turkey
Microwave Sintering and Characterization of Cu-Cr-SiC Composite Materials
Co-authors: EROL A., Kaplan H.